VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: regcheeseman on December 03, 2007, 02:14:49 pm

Title: Crank sprocket torque setting 1.6 GTD?
Post by: regcheeseman on December 03, 2007, 02:14:49 pm

Mr Haynes' manual for a 1.6 NA diesel is telling me 57ft/lb

My T4 was 160 + 180 turn

There's just a bit of difference between these figures - can someone tell me the torque for the 1.6 TD

I have had a search and found some good stuff but not the figure...

Title: Crank sprocket torque setting 1.6 GTD?
Post by: burn_your_money on December 03, 2007, 02:43:50 pm

As per my mk2 bentley (which includes gas engines)

Crankshaft Sprocket to Cracnkshaft (lubricated)
6 sided bolt with washer ..........180 NM (137 ft.lb)
Hex head bolt with washer...... 150 NM (111ft.lb)
12 sided bolt with collar (no washer) 90 NM (66 ft.lb)

Title: Crank sprocket torque setting 1.6 GTD?
Post by: regcheeseman on December 04, 2007, 01:11:00 pm

Cheers!