VWDiesel.net The IDI, TDI, and mTDI source.

General Information => Troubleshooting => Topic started by: haybayian on December 03, 2007, 05:16:46 am

Title: crankshaft sprocket bolt specs?
Post by: haybayian on December 03, 2007, 05:16:46 am

Sorry VW friends for asking such a pedestrian question.
 My 1.9 TD long block was delivered to me with a crankshaft sprocket but seemingly  no bolt to hold it there. How the machine shop managed to force the sprocket in position without a bolt is beyond me.

Does anyone know off-hand the specs of this specific bolt??? I am aware of the thread below on the same subject, i.e 12 point bolts, 19 mm sockets etc. What I need is your advice on the darn bolt, what to buy and where.

Thanks.

Haybayian

Title: crankshaft sprocket bolt specs?
Post by: myke_w on December 03, 2007, 06:21:24 am

most are one time use only anyway.. stretch bolts..  go to the dealer and buy one.

Title: crankshaft sprocket bolt specs?
Post by: MikkiJayne on December 03, 2007, 06:43:26 am

For reference it's M14x1.5x47.

VW number is N 905 771 01. It should only be a couple of dollars.

Hth, Mikki x

Title: crankshaft sprocket bolt specs?
Post by: haybayian on December 03, 2007, 07:46:29 am

Quote from: "MikkiJayne"

For reference it's M14x1.5x47.

VW number is N 905 771 01. It should only be a couple of dollars.

Hth, Mikki x

Thanx Mike & Mikki
 I will buy one from the dealer.
Haybayian

Title: crankshaft sprocket bolt specs?
Post by: rubadubdub on December 03, 2007, 05:47:46 pm

www.vagcat.com has all the part numbers provided you know which bit you're after.

Title: crankshaft sprocket bolt specs?
Post by: haybayian on December 04, 2007, 12:50:44 pm

Quote from: "rubadubdub"

www.vagcat.com has all the part numbers provided you know which bit you're after.

Thanks,
This seems to be a good orientation  for sourcing parts

Haybayian