VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: ELVIS on September 14, 2007, 02:40:21 pm

Title: boost controller ?
Post by: ELVIS on September 14, 2007, 02:40:21 pm

(http://i49.photobucket.com/albums/f262/ELVISISGOD/HUNGARY2007395.jpg)

got an engine as a 'cut out' from the breakers - i think the hose that has been cut is meant to go to the factory boost controller . unfortunately i never had it from the car before it was crushed . do i need one on a near enough stock engine ? can i get away with plugging it ? any ideas ? am i best to get another factory boost controller from a wrecker ?  cheers   elvis

Title: boost controller ?
Post by: Hillshy on September 15, 2007, 01:28:41 pm

hey elvis,

is that you?......... from brickyard?

hello, id rejoin it with a jub clip it won't hurt it and will seal well, even if you run 15psi i won't pop off.

hills

Title: boost controller ?
Post by: ELVIS on September 15, 2007, 01:52:08 pm

'tis me ! :lol:   i dont understand your answer - am i a mong ? rejoin it to what ? can i just put a piece of tube on and block the end with an M4 bolt and jubilee clip it shut/blank it off ? cheers  elvis

Title: boost controller ?
Post by: Hillshy on September 15, 2007, 01:59:32 pm

fort it was you :o

"standard boost controller" i took that to mean the bov valve under your finger, (pic is a bit fuzzy) but it looks like the black hose is split.

is that what you mean or is that not the case?

hills

Title: boost controller ?
Post by: clanton1.8T on September 24, 2007, 05:40:18 am

:shock: the only hose i see cut is the air intake. if thats the case if you can't block that off. get or make a new hose to run to an air filter.

Title: boost controller ?
Post by: burn_your_money on September 24, 2007, 10:35:53 am

Is that a T3 turbo?

(http://img.photobucket.com/albums/v603/burnyourmoney/forsale025-1.jpg)

(http://img.photobucket.com/albums/v603/burnyourmoney/truck012.jpg)

(http://img.photobucket.com/albums/v603/burnyourmoney/truck006.jpg)

(http://img.photobucket.com/albums/v603/burnyourmoney/truck005.jpg)

maybe one of these pictures of one of my old turbos will help you

Title: boost controller ?
Post by: ELVIS on September 24, 2007, 12:42:55 pm

its an AAZ , im fitting it in my T3 but using all the AAZ manifolds!
   on the second pic down , where does the braded small bore line connect to that goes from the turbo ?   cheers   elvis

Title: boost controller ?
Post by: ELVIS on September 24, 2007, 12:45:02 pm

oh ,  :lol: , T3 - get it now - either T3 or K14  - cant remember without looking - ive got so much crap in my garage ive lost count :lol:

Title: boost controller ?
Post by: burn_your_money on September 24, 2007, 03:33:12 pm

Quote from: "ELVIS"

oh ,  :lol: , T3 - get it now - either T3 or K14  - cant remember without looking - ive got so much crap in my garage ive lost count :lol:

That's why I added in "turbo" I knew it would throw some people off. :P

I forget where that line goes, I'm sure someone will know though