VWDiesel.net The IDI, TDI, and mTDI source.

General Information => Upgrades (non engine related ) => Topic started by: bryanb on June 06, 2015, 12:14:13 am

Title: Clutch slips at about 12 psi
Post by: bryanb on June 06, 2015, 12:14:13 am

Well I need a new clutch but can't find anything better than stock for a 1.6 TD FF code trans so please point me in a direction? I plan on building the engine including internals as much as possible so strong is key.

Title: Re: Clutch slips at about 12 psi
Post by: theman53 on June 06, 2015, 11:14:57 am

Upgrade to a 210mm flywheel and clutch. If you are going for bunches of more power look for a company called Clutchnet. Don't get a solid hub clutch. When you get a flywheel there are 1 pin and 2 pin 210mm versions, get the clutch that matches.

Title: Re: Clutch slips at about 12 psi
Post by: bryanb on June 07, 2015, 11:36:06 pm

Quote from: theman53 on June 06, 2015, 11:14:57 am

Upgrade to a 210mm flywheel and clutch. If you are going for bunches of more power look for a company called Clutchnet. Don't get a solid hub clutch. When you get a flywheel there are 1 pin and 2 pin 210mm versions, get the clutch that matches.

I thought the ff code trans was one of the phew a 210 flywheel would not clear the bell housing

Title: Re: Clutch slips at about 12 psi
Post by: theman53 on June 08, 2015, 10:11:52 am

The OD of all the 020 flywheels are the same IIRC. The inside clutch surface is the only difference. I have seen 4 speed trans with 210 in them no issues.

Title: Re: Clutch slips at about 12 psi
Post by: bryanb on June 08, 2015, 10:23:42 am

Ok thanks