VWDiesel.net The IDI, TDI, and mTDI source.
General Information => Troubleshooting => Topic started by: X@V on November 27, 2007, 06:29:43 pm
-
Hi,
I have a '03 ALH TDI into a '92 Jetta (it was a 1.6TD)
I want to use the stock MK2 cluster, but it indicates ~1100 instead of 900rpm at idle.
As I know, the input is a 0-12v signal. The frequency is wrong for my cluster (reading 903rpm on the vag-com, it's electronic TDI, not a M-TDI)
Is there any solution?
Thanks
-
I found a 22k pot on the board... is it this one? (R3)