View full version: IDI Engine
  1. Girdles, studs, crankscrapers, and intakes. Q&A
  2. 1.6 NA intake system re-engineering
  3. Bosch VE injector pump rebuild opinion wanted
  4. 020 transmission flange seal size
  5. Intercooler fitting
  6. Ball bearing turbos ??
  7. Fuel in oil
  8. groggy AAZ
  9. reciprocating mass / spun weight, torque, top end
  10. How much boost do you run?
  11. SB to JX differences.. upgrade?
  12. Need help with parts location and prices
  13. Where can I buy a rebuild kit for a N/A Bosch Injector pump?
  14. Help ASAP w/ fluid leak....please
  15. GT2559vwho wants one?
  16. Allow i to present!
  17. please help gtd injectors garret t3 installed now smokes
  18. Are any VNT turbos direct bolt-on 1.6TD?
  19. Oil warning light
  20. Some oil in the intake tract?
  21. Turbos?
  22. To turbo or not
  23. Question about the way the turbo spools in my 1.6TD w/ K24
  24. loose
  25. A/C and intercoolers
  26. AN fittings = what std/metric sizes
  27. won't start
  28. Water in fuel sensor
  29. does anyone know know to contact - fspGTD
  30. AC condensor bypass belts and braket
  31. Pressure/temp gauge install help
  32. Boost Limiter Switch Removal
  33. 1.6 n/a and 1.6 td crank
  34. probably a dumb idea, but......
  35. Will an intermediate shaft pulley from a 1.6 fit a 1.9 aaz?
  36. Replace engine or not? Newbe needs options.
  37. Head/ headgastet /cooling system questoin
  38. 1.6 performance mods
  39. What starters work on a 86 Golf Diesel 1.6 NA
  40. Sputter bearings
  41. 1.9td turbo swap
  42. Help!!Broke the electrical connection bolt on my 1.6 starter
  43. Pump question.
  44. Kolbenschmidt 1.6TD piston part #needed.
  45. cylinder head bolts
  46. 135bar instead of 155bar injectors in a 1.6TD?
  47. AAZ pistons anyone?
  48. Engine rebuild
  49. Mechanical and Hydraulic Cams
  50. No top end power, hesitation