View full version: IDI Engine
  1. Just installed my FMIC
  2. Cooling issue on NA diesel
  3. 1.6 to 1.9td swap (driveshafts wont fit)?
  4. 1.6L N/A Hard Starting
  5. vr6 head bolts on 11mm engines..
  6. Fleetguard lube filter part number? ('87 1.6TD)
  7. 1.6 hydro head to 1.6 mech block workable?
  8. Mechanical head on hydraulic block?
  9. 1.9 AAZ INTAKE BOOT/ TURBO TO MANIFOLD 1.75 I.D. to 1.50 I.D.
  10. WMO ratios, climate, etc.
  11. stripped timing pulley
  12. Where to Buy Injector Supply Lines
  13. 1.9 AAZ / K03 TURBO OIL RETURN LINE
  14. what's the thread pitch of AAZ block turbo oil return banjo?
  15. What izzit oil pump?
  16. Max boost on GTD intercooler
  17. Difference in IP throttle levers? (Bosch VE)
  18. Newb Questions
  19. 1.6 Build Questions
  20. have any of you guys rebuilt your own turbos?
  21. Manual Boost Controller fitting help please!
  22. VNT turbo
  23. Diesel leak... Need help.
  24. td scirroco
  25. 1.6TD in Caddy
  26. rebuild! this is what I've got
  27. Injector pump question relating to WVO conversion.
  28. what does this sensor do?
  29. Max boost using fiber headgasket?
  30. Question
  31. K03 Turbo OHC & Upgrade
  32. New here, Few Questions!!!
  33. D24T power!!!
  34. bearing numbers?
  35. Garret T2 turbo
  36. Re building advice
  37. hot tank after honing?
  38. using a gast tank instead of diesel tank...
  39. AAZ pump on a 1.6TD?
  40. Where to tap in Coolant System for Gauge
  41. Turbo id and aaz tuning advice please
  42. request.
  43. AAZ scrap yard injection pump, any prep before install?
  44. Picture of my 1.9 AAZ NA engine
  45. too much boost
  46. Head gasket / Inj pump Timing
  47. AAZ crank failure results
  48. I know what the book says about the Intermediate shaft , but.....
  49. Intercooler for K14 turbo?
  50. 1.9 AAZ TURBO TO INTAKE MANIFOLD DUCT