View full version: IDI Engine
  1. mk1 rear tran mount where to buy?
  2. 1982 Vanagon AAZ Finding TDC for Crank
  3. Just curious...
  4. Broke aaz vacuum pump plastic hose connector
  5. Anyone done water/meth injection on an AAZ?
  6. Holset choice?
  7. Old article by David Vizard on Do-It-Youself porting
  8. air bubbles in injector overflow lines
  9. high idle after injection pump rebuild and cold start lever does nothing
  10. Smoke at idle
  11. giles pump tuned for k24 paired with k03
  12. 25psi boost, rebuilt k14, ARP studs and AAZ MLS
  13. Attempted pump repair and rebuild
  14. How do you test oil squirters?
  15. What is causing this after head gasket and injection pump rebuild?
  16. Thread size for 1.6D NA fuel injectors
  17. questionable rebuilt pump
  18. Need help in I.D. of engine
  19. Crankcase breather - valve cover leaks
  20. VW 2.4 Diesel Best Nozzles (Volvo D24)
  21. Looking for aftermarket cold start cable. AAZ in a Mk1
  22. No compression after head gasket job?
  23. Gauges...which ones?
  24. Turn camshaft by hand?
  25. TDI fuel fittings on a IDI pump
  26. Weber intake manifold on a diesel???
  27. M12 or T-55 for head bolts?
  28. Do I need AAZ injector lines.....?
  29. Piston Damage
  30. Would You Run This Cylinder head?
  31. 150hp+ aaz build
  32. Volvo D24 VNT Project.
  33. I'm building a glow plug controller, looking for your input.
  34. Interest in co-developing a stand-alone ECU for 16V CR engines?
  35. What to do with some of my sad old parts: cyl head and inj pumps
  36. GT1548 turbo
  37. Gauge for stock oil temp sender (and psi sender?)
  38. Head Bolts or Studs (1588)
  39. 1.6 td alternator wiring swap
  40. idle adjustment after fuel screw adjustment
  41. Theft. Switch. Silinoid ip pump
  42. Check bolts while my oil pan is off?
  43. NOS AAZ cam caps (?)
  44. Coolant overflow leaking fluid out the cap
  45. Pumps. Difference. 1.6 eco 81 na
  46. 1.6 pump on a 1.9 VW Westy with a Holset
  47. Smaller cooler for 1.6TD
  48. 1.6 Td Idle rev hang SOLVED
  49. Testing for boost leaks - Holset
  50. IP Throttle Advance: Mechanical vs. Vacuum Actuated