View full version: IDI Engine
  1. A Question About Turbos
  2. remove oil cooler?
  3. New Intake Mani Idea
  4. ok to use injection pump td plunger,delivery valves in na distribution head?
  5. AAZ turbo oil supply and return line banjo bolt sizes
  6. Head gasket brand preference?
  7. My Mk2 from 1.6D to 1.6TD
  8. Debris in no.2 cyl??
  9. what do the stamped numbers on lda pins mean?
  10. Pistons
  11. FRANKENMOTOR - Clack or smoke?
  12. fresh rebuild ran good now not so much why??
  13. sound proofing a vanagon diesel 1.9 na
  14. I need a k03 used turbo
  15. Head Gasket Thickness
  16. passat 1.9 and 02a box
  17. Freeze Plugs
  18. Cleaning oil out of cooling system 1.6 Rabit PU
  19. Seat belt pics
  20. garret t3 rebuild questions
  21. In vancouver need injector lines HELP!!!!!
  22. Bosch rebuilt injectors - my experience
  23. Paranoid about dropping a prechamber
  24. boost spike on AAZ stuck wastegate?
  25. Coolant temp gauge reading is lower after new head gasket
  26. Reboot 1.6
  27. Engine advice
  28. Getting ready to install new injector nozzles in my 1V Ecodoiesel
  29. Blow by on a rebuild???
  30. Bently head gasket torque procedure
  31. That Smell
  32. bad vibrations...... and no TDC mark on flywheel...
  33. is this still a good donor for a 11mm pump swap?
  34. Timing question
  35. can you install an injection pump turbo top to a na lower half?
  36. bad starter on 1.9TD
  37. kkk or garette ?
  38. no diesel out of injector lines after pump rebuild
  39. North America's First Turbo Diesel VW Fox
  40. Poll: Convinced into a state of uncertainty
  41. K24 Question
  42. cold start coolant temp sensor
  43. Motor Serial Numbers
  44. Lots of clatter from 10mm hybrid pump on franken motor
  45. aaz fuel filter question
  46. looking at this mk1 (L version)..... thoughts?
  47. Air cleaner suggestions wanted
  48. Coolant filter
  49. Buzzing Noise AAZ vanagon
  50. Injection pump timing on a 1.6/1.9 franken engine