View full version: IDI Engine
  1. My new toy MkI caddy
  2. Elring headgasket install. Dry or copper spray ?
  3. Turbo setups! Need some info!
  4. Will a NA motor run ok with a turbo but no upgraded pump?
  5. 1.9 head ports cut away
  6. Has anyone used these for timing?
  7. Lets talk vnt's for a bit.
  8. Broken lifter - stupid, stupid, stupid
  9. Help ID this piston, block, and head gasket
  10. un-sticking stuck piston rings
  11. Thermostat questions
  12. Warming up an Eco-Diesel
  13. Exhausts for a TD
  14. Oil cooler questions. Looking at universal setup.
  15. 1.9TD Coupe Project
  16. Oils for a 1.6TD?
  17. Observe this intake...
  18. Fuel line....HELP.
  19. Block heater question and bolt needed
  20. Need an alternator Bracket for an AAZ
  21. Another thermostat thread ;D
  22. AAZ metal HG would you go one hole or two?
  23. AAZ K14 Turbo Leaking, Still
  24. AAZ torque specs for Mains and Rods
  25. Evolution of the IDI injector
  26. Where is the cheapest source for new nozzles?
  27. stock rpm vs speed for a 93 jetta
  28. re-using stretch big end bolts
  29. 1975 Rabbit Mechanical fuel pump
  30. Building my Low Buck GTD
  31. Stupid question time re: TDI-ish crank venting
  32. Posting Pic hosted elsewhere
  33. air infiltration at 10,000 ft, could it be fuel pin leak?
  34. ..............
  35. "85 GTI Wiring Diagram
  36. has anyone here played with a hydrogen generator?
  37. DIY? Make tach work properly with a 1.9TD Swap in an mk2TD!
  38. More About Prechamber Inserts
  39. AAZ, AHU, ALH, finding proper parts
  40. AAZ Pump Timing.
  41. Free Turbo Calculator--works for double compounds
  42. Glow Plug pimpage, a different approach.
  43. Starter Heat Shield on auto trans.
  44. Oil leaking out of intake...
  45. leaky front main seal
  46. Dissecting a cylinder head
  47. extra line from or to injection pump
  48. Audi Quattro Turbo Diesel Build - Now with video!
  49. Tachometer wiring confusion
  50. Turbo Bolts