VWDiesel.net The IDI, TDI, and mTDI source.
Engine Specific Info and Questions => TDI Engine -General Info => Topic started by: GEE-BEE on July 09, 2014, 03:51:50 pm
-
Removing p/s
keeping a/c assy
Is there a serp setup for this to drive the waterpump ?
Found
http://www.online-teile.com/audi/product_info.php?info=p333851006_028903141ap-halter.html&XTCsid=9e43721193ef35b707967e7e14c2844a
-
Quantium td split wp pully so crank drives just wp...
Also have 2 kamie nib front rabbit air dams... Look up old 4sale add... Good year ago
-
send a pic please
price
[email protected]
PART # OF PULLEY
-
Found it
Libby posted it
068-121-029 a
shims 068-121-185b
belt 10 x 650
-
Learn to use SEARCH and you will find bst post and quantium pully info... But i refuse to search on cell phone... And refuse to let local isp people *** me like they want me to allow...
You asked... I replied... My reply stipulates its on the forum... Else id have told you where to search...
-
he replied back...in sales as I am sometimes you need to go the extra mile and search for them if you want it sold. I will search for you this time :D
http://www.vwdiesel.net/forum/index.php?topic=32898.msg306069#msg306069
-
I found the sales ad..
I just asked for current pics of the spoliler that was available
I purchased a new rear spoilerfor the mk1 jetta last week from Germany,
-
Tied up in same rafters they were put after ad made.... Ad does not say either sold... And phone gives ? For any photos... So no help with that... Add has it all... So imo no extra mile required lucas... All i did was confirm they still for sale... I could be a tool and bump it few times a day...
The price will never go down... Just up... So whats it matter if its new ad or not...
-
When I did my 1.6 I just found a v-belt that just drove the power steering (in your case you won't need that) and used the serp belt with a VR6 pulley (on water pump) to drive the alternator and the water pump. However I did not use the belt tensioner style mount the TDI has for air and . I found mount just for the alternator and it tensions the belt. I can provide pics of this if it helps...
-
I don't think you can drive the wp via the serp belt if you have the AC compressor in place? There would be basically no wrap on the wp pulley unless you could find a reverse rotation water pump. And I don't believe those exist.
-
The reverse rotation water pumps do exist in the European market but are rare as can be. Someone posted pics/info on application on this forum. Personally, I prefer using the locally available parts and like having JUST the water pump on the one belt. That way all the other serp driven accessories can fail or the belt can break, and I'm still not dead in the water.
-
I don't have a ac compressor on my car. the VR6 pulley works the wrong way. The v's in the serp belt run on the flat surface of the pulley. I've ran it like that for 4-5 years now without issue.
-
Libby
Do you know this reverse wp part #
-
Libby
Do you know this reverse wp part #
http://www.vwdiesel.net/forum/index.php?topic=9599.30
some stuff on that thread is useful. I think the part # was posted by MJF on there about 3rd page and a couple replies down.
-
Water pump is found no problem
Found
028-903-141AP
http://www.online-teile.com/audi/product_info.php?info=p333851006_028903141ap-halter.html&XTCsid=9e43721193ef35b707967e7e14c2844a
-
This wont drive the a/c assy
Returned
-
My second motor build has started
Bad bad block and intermediate shaft
New block for 445.00, off it goes to powdercoater with new head assy
The crank is being sent out for balance..
GB