VWDiesel.net The IDI, TDI, and mTDI source.

Model Specific Questions and Info => MK2 Golf/Jetta and Audi 5k => Topic started by: Iamvandemon on August 11, 2020, 10:43:13 pm

Title: Fiberglass trunk box MK2 Jetta
Post by: Iamvandemon on August 11, 2020, 10:43:13 pm
I wanted to have a semi permanent box in the trunk to keep the extra filters, water, tools from rolling around in a jumble. I decided to throw something together simple with some leftover fiberglass. I maybe a form out of cardboard and tape. Then I cut some small coolant hose to slide over the top edge to make it more rigid. Fiber glassing it 'in place' was a little messy, but I did remove the carpet and  fabric first so no harm no foul as far as I'm concerned.
(https://i.ibb.co/M6KGrqs/Trunk-Box.jpg)
Then I cut up some brackets from the scrap bin and fastened them in place and ran a second layer of glass and resin.
(https://i.ibb.co/d6y8dH4/Trunk-Box2.jpg)
after it was cured I pulled it out and removed all the cardboard and tape and trimmed of the excess glass. then I added a bit more hose and layered up a bunch of glass and resin. The next day I trimmed it and ran the flap disk over it.
(https://i.ibb.co/ncGHtjV/Trunk-Box3.jpg)
(https://i.ibb.co/TqSMyYw/Trunk-Box4.jpg)
Then I sprayed a few layers of a few different colors of whatever paint was almost empty on my shelf.
(https://i.ibb.co/xqhj4yf/Trunk-Box5.jpg)
Light, Sturdy, Removable, but most importantly Inexpensive.... :)
(https://i.ibb.co/12w10pF/Trunk-Box6.jpg)