VWDiesel.net The IDI, TDI, and mTDI source.

For Sale/Looking For => Parts for Sale/Wanted => Topic started by: dailydubber on August 03, 2017, 10:40:55 am

Title: WTB: VW 1.6 diesel turbo hose
Post by: dailydubber on August 03, 2017, 10:40:55 am
I'm looking for the hose that comes from the turbo compressor outlet and into the intake manifold. I have a k24 Turbo. My zip code is 21666

Sent from my HTC6545LVW using Tapatalk

Title: Re: WTB: VW 1.6 diesel turbo hose
Post by: RockOcean on August 03, 2017, 01:02:50 pm
I'm looking for the hose that comes from the turbo compressor outlet and into the intake manifold. I have a k24 Turbo. My zip code is 21666

Sent from my HTC6545LVW using Tapatalk
I have one from an AAZ 1.9L Turbo Diesel not sure if it's the same? The part number is 1H0 129 627 AB.

(https://uploads.tapatalk-cdn.com/20170803/414ce83c8c3b0e140abecdc4750fad84.jpg)

Sent from my SM-G925V using Tapatalk

Title: Re: WTB: VW 1.6 diesel turbo hose
Post by: dailydubber on August 03, 2017, 01:22:56 pm
I'm actually looking for the one
 coming out of the turbo and not going in the turbo like the one on this link:
http://www.mk1autohaus.com/Lifetime-Silicone-16L-TD-19L-Aaz-Turbo-Diesel--Intake-Boost-Hose_p_6518.html

Sent from my HTC6545LVW using Tapatalk

Title: Re: WTB: VW 1.6 diesel turbo hose
Post by: RabbitJockey on August 04, 2017, 07:32:32 am
if you are not worried about it looking original you can use a 2" silicone elbow, i have in the past. black silicone looks decent too.
Title: Re: WTB: VW 1.6 diesel turbo hose
Post by: dailydubber on August 04, 2017, 05:08:13 pm
if you are not worried about it looking original you can use a 2" silicone elbow, i have in the past. black silicone looks decent too.
I've tried putting a 90 degree elbow like you mentioned but it is getting kinked. I've also adjusted the compressor housing to lessen the kink but it didn't work. So I figured the original has special curves to prevent any kinks.

Sent from my HTC6545LVW using Tapatalk
Title: Re: WTB: VW 1.6 diesel turbo hose
Post by: RabbitJockey on August 07, 2017, 07:40:07 am
mine was on an aaz which has a little bit different of an angle on the inlet hose so maybe i had better luck because of that.