VWDiesel.net The IDI, TDI, and mTDI source.
For Sale/Looking For => Parts for Sale/Wanted => Topic started by: RockOcean on July 30, 2017, 04:49:37 pm
-
All parts listed below were pulled off of a running engine with 90k on it. Priced as listed plus shipping.
- Water pipe to oil cooler engine coolant 037 121 065L $20
- Oil feed line to turbo 028 145 771D $50
- Injection Pump Bracket 028 130 147A $150
- Air hose ventilation for cylinder head cover 028 103 493 $10
- Intake Manifold 028 129 713E $70
- VR6 water pump pulley $10
- AAZ 1.9D Block can only be bored out to fit the 81mm ASV TDI pistons making the displacement 2.0L Pickup only in Roxbury, ME $200
- Vacuum Pump $150
- Connecting Rods $150
- Main Caps with old style reusable bolts $50
- Harmonic Balancer 028 105 243 T $35
- Crankshaft with AHU crank sprocket. Needs a regrind for .25mm over sized bearings $350 shipped, $250 if you pick up.
(https://farm2.staticflickr.com/1734/41774586865_e8d7f20945_c.jpg) (https://flic.kr/p/26DtFgF)IMG_2145 (https://flic.kr/p/26DtFgF) by RockOcean.com (https://www.flickr.com/photos/atflickr/), on Flickr
(https://farm2.staticflickr.com/1730/41774586355_523bfef488_c.jpg) (https://flic.kr/p/26DtF7T)IMG_2154 (https://flic.kr/p/26DtF7T) by RockOcean.com (https://www.flickr.com/photos/atflickr/), on Flickr
(https://farm2.staticflickr.com/1725/27805270547_366ffb90a3_c.jpg) (https://flic.kr/p/Jn4hdk)IMG_2183 (https://flic.kr/p/Jn4hdk) by RockOcean.com (https://www.flickr.com/photos/atflickr/), on Flickr
(https://farm2.staticflickr.com/1752/41774581765_75dfb1a500_c.jpg) (https://flic.kr/p/26DtDKK)IMG_2185 (https://flic.kr/p/26DtDKK) by RockOcean.com (https://www.flickr.com/photos/atflickr/), on Flickr
(https://farm2.staticflickr.com/1757/27805269417_7be55e1584_c.jpg) (https://flic.kr/p/Jn4gSR)IMG_2189 (https://flic.kr/p/Jn4gSR) by RockOcean.com (https://www.flickr.com/photos/atflickr/), on Flickr
(https://farm2.staticflickr.com/1728/27805269027_9d713c804c_c.jpg) (https://flic.kr/p/Jn4gL8)IMG_2191 (https://flic.kr/p/Jn4gL8) by RockOcean.com (https://www.flickr.com/photos/atflickr/), on Flickr
(https://farm2.staticflickr.com/1731/27805268587_34ea1b95e1_c.jpg) (https://flic.kr/p/Jn4gCx)IMG_2192 (https://flic.kr/p/Jn4gCx) by RockOcean.com (https://www.flickr.com/photos/atflickr/), on Flickr
(https://farm2.staticflickr.com/1730/27805265667_1f00241148_c.jpg) (https://flic.kr/p/Jn4fLc)IMG_2212 (https://flic.kr/p/Jn4fLc) by RockOcean.com (https://www.flickr.com/photos/atflickr/), on Flickr
(https://farm5.staticflickr.com/4301/36137779331_d35a5a7235_c.jpg) (https://flic.kr/p/X4nyLT)AAZBlockFront (https://flic.kr/p/X4nyLT) by RockOcean.com (https://www.flickr.com/photos/atflickr/), on Flickr
(https://farm5.staticflickr.com/4293/35877007290_75e9683218_c.jpg) (https://flic.kr/p/WEk3kd)AAZBlockBack (https://flic.kr/p/WEk3kd) by RockOcean.com (https://www.flickr.com/photos/atflickr/), on Flickr
(https://farm5.staticflickr.com/4166/34793067266_d3c19b25bd_c.jpg) (https://flic.kr/p/V1xyJ7)#4CylinderWear (https://flic.kr/p/V1xyJ7) by RockOcean.com (https://www.flickr.com/photos/atflickr/), on Flickr
(https://farm5.staticflickr.com/4292/35876796920_41168081ee_c.jpg) (https://flic.kr/p/WEiXN9)AAZVacuumPump (https://flic.kr/p/WEiXN9) by RockOcean.com (https://www.flickr.com/photos/atflickr/), on Flickr
(https://farm5.staticflickr.com/4318/35466473433_0aa897dc7c_c.jpg) (https://flic.kr/p/W33WVg)ConnectingRods (https://flic.kr/p/W33WVg) by RockOcean.com (https://www.flickr.com/photos/atflickr/), on Flickr
(https://farm5.staticflickr.com/4294/35438133354_535b1c0aa3_c.jpg) (https://flic.kr/p/VZxGpd)AAZMainCapsOldBolts (https://flic.kr/p/VZxGpd) by RockOcean.com (https://www.flickr.com/photos/atflickr/), on Flickr
(https://farm5.staticflickr.com/4317/35466068883_6aa437cd44_c.jpg) (https://flic.kr/p/W31SEg)AAZHarmonicBalancer (https://flic.kr/p/W31SEg) by RockOcean.com (https://www.flickr.com/photos/atflickr/), on Flickr
(https://farm5.staticflickr.com/4300/36228438596_1d55399090_c.jpg) (https://flic.kr/p/XcodBE)CrankAHUSnout (https://flic.kr/p/XcodBE) by RockOcean.com (https://www.flickr.com/photos/atflickr/), on Flickr
(https://farm5.staticflickr.com/4308/35465253973_8190afdc55_c.jpg) (https://flic.kr/p/W2WGq6)CrankAAZAHU (https://flic.kr/p/W2WGq6) by RockOcean.com (https://www.flickr.com/photos/atflickr/), on Flickr
-
do you have the seal carrier for the intermediate shaft? How many miles are on the injectors?
-
do you have the seal carrier for the intermediate shaft? How many miles are on the injectors?
Yes I have the seal carrier. The injectors where rebuilt by Giles when I rebuilt the engine about 80k ago.
Sent from my SM-G925V using Tapatalk
-
Intermediate Shaft, and injectors are sold.
-
Exhaust manifold has been sold.
-
you don't have any 1,3, and 5 cam caps for sale do you?
-
I do have them but I am still thinking about rebuilding the head and selling it complete. So I don't really want to sell it piece by piece.
Sent from my SM-G925V using Tapatalk
-
Ryan, I have seen it mentioned that it is possible to fit the 81mm ASV TDI pistons making the displacement 2.0L. Some trouble with getting an appropriate head gasket but searching on the TDI club gives a couple options.
-
Ryan, I have seen it mentioned that it is possible to fit the 81mm ASV TDI pistons making the displacement 2.0L. Some trouble with getting an appropriate head gasket but searching on the TDI club gives a couple options.
Thanks for that tip Andrew. I purchased a running 96 Passat tdi with 230k a couple months ago for dirt cheap so I am eventually going to put that engine in my van.
Sent from my SM-G925V using Tapatalk
-
I haven't seen a head gasket that actually works for the 2.0 bore on the earlier blocks. ALH+ is no issue, AHU/1Z there's no suitable gasket available.
Sent from my LG-H873 using Tapatalk
-
I've seen on TDI club several people saying they used one of the G60 head gaskets without issue.
-
Hey,
Do you have injector lines?
Thanks!
-
I do have them, unfortunately I am in Montana for the winter and the lines are in Maine. I will contact my friend to see if he can find them and ship them out. $50+ shipping sound fair?
-
Thanks for responding! If there's to be a bit of a wait, what would you say to 50$ shipped?
-
Thanks for responding! If there's to be a bit of a wait, what would you say to 50$ shipped?
Unfortunately my buddy is out of the country til the new year. I will contact you when he gets them in hand.
Sent from my SM-G925V using Tapatalk
-
I'm not in a rush. Let me know when you're friend is around. Thanks!
-
Do you have a k14 turbo?
Thank You,
Greg
-
Sorry no K14 turbo.
-
Bumping a semi old thread... looking for the 2 piece CCV breather tube. Also found on some, but not all, A3 and B4 TDI engines.
-Todd
-
Double-bump -- any word on those injector lines?
-
Sorry it took so long to get back to you. I just had my friend in Maine find them. If you would still like them please let me know. $50 plus shipping.
(https://farm5.staticflickr.com/4665/38731245720_7690d89551_h.jpg) (https://flic.kr/p/221xKYC)28641600_10156260752272884_1955395898_o (https://flic.kr/p/221xKYC) by RockOcean.com (https://www.flickr.com/photos/atflickr/), on Flickr
-
Do you have the metal coolant pipe?
-Todd
-
I am almost certain that I do have it. I am currently in Florida and wont be back to Maine where the parts are until June 1st. I will have my friend look for it and hopefully ship it out for you. How does $25 plus shipping sound? Just to confirm this is the pipe your looking for correct?:
(https://farm1.staticflickr.com/951/41758234811_fbf27de5a7_c.jpg) (https://flic.kr/p/26C2SnH)AAZCoolantPipe (https://flic.kr/p/26C2SnH) by RockOcean.com (https://www.flickr.com/photos/atflickr/)
-
That’s it. I’ll gbty if I can’t find it, by June.
-Todd
-
I updated the parts that are left, and the prices. I also have all the parts with me now, so no more waiting on friends to find and ship parts for me :~ )
-
Looking for the intermediate shaft pulley?
-
Sorry the intermediate shaft pulley has been sold.
-
Really old post...you still have parts? I need an AAZ turbo intake manifold, cheers.
-
I have it sitting right here. $85 shipped I will send it out tomorrow.
-
Hi thanks for the quick reply, I sent you a PM
-
Do you have a oil drain line for AAZ with a K14 turbo?
-
Unfortunately I do not have that part.
-
Any chance you have the exhaust elbow part that bolts to the turbo studs (with the four nuts and has the donut gasket at the bottom)?
-dave
-
I do - but I actually need it for my van. I have been running no exhaust on my van for years and that part has rusted almost all the way up to flange.. So I am saving that part for when I finally get to doing a proper exhaust some day, sorry. It also only goes down maybe 4 inchs there is no donut gasket on it.
-
Are any AAZ injector lines around?
Sent from my iPhone using Tapatalk