VWDiesel.net The IDI, TDI, and mTDI source.

For Sale/Looking For => Parts for Sale/Wanted => Topic started by: tdrabbit on March 25, 2016, 12:45:01 pm

Title: 1.6d head, k24 turbo, ARP head studs, claudes brigges valve cover, 1.6d injection pump, 1.6d ecodies
Post by: tdrabbit on March 25, 2016, 12:45:01 pm

Trying to liquidate so I can build my 20v...

-1.6d parts place inc NEW 12mm mechanical head (1k miles, paid $600)- $450shipped
(http://uploads.tapatalk-cdn.com/20160325/16e79747b16c039ebe1e70a9d27ec6d1.jpg)
(http://uploads.tapatalk-cdn.com/20160325/bc5abcf325ed15535822a70477871a38.jpg)
(http://uploads.tapatalk-cdn.com/20160325/f155f05ce37d7f21c8e0647d951fb4fd.jpg)

-1.6d intake manifold- $25 p/u

-1.6d 4-speed trans- $100 p/u
(http://uploads.tapatalk-cdn.com/20160325/92ecfe6991b40b7e9728144168230de8.jpg)

-1.6d ARP head studs- $75 shipped
-rebuilt 1.6d injectors(500 miles)- $300 shipped

(http://uploads.tapatalk-cdn.com/20160325/0d25188ac9ff6cf17bbcb6c381aa5750.jpg)
(http://uploads.tapatalk-cdn.com/20160325/2180f91f6a7261bbf6880155e6b49f8b.jpg)

-Freshly rebuilt k24 turbo (500 miles)
-k24 exhaust manifold
-1.6d intake manifold

(http://uploads.tapatalk-cdn.com/20160325/2dd7db2bcfe0a8b3163aa3dceb45b428.jpg)
(http://uploads.tapatalk-cdn.com/20160325/d70dc3bb520c9b9f75087bb2da653bb4.jpg)
(http://uploads.tapatalk-cdn.com/20160325/316d23340619a06a1f011fef0a60f607.jpg)

-1.6d eco diesel block
-5-speed ecodiesel trans

-8v shortened oil pan and oil pick up tube, 1/8" reinforced steel used on the bottom- $120 shipped

(http://uploads.tapatalk-cdn.com/20160325/18d67563bf67feb2b62fab93b2cdc54d.jpg)
(http://uploads.tapatalk-cdn.com/20160325/463609eed9c024c4043db7344b3ed00a.jpg)

1.6d block/fuel pump

(http://uploads.tapatalk-cdn.com/20160325/aa73645f69417c76d3a9263b8cfa9832.jpg)



Sent from my iPhone using Tapatalk


Sent from my iPhone using Tapatalk

Title: For sale - Rear drums, shoes + brgs/seals for mk2
Post by: SpannerMonkey23 on February 25, 2018, 02:19:01 pm

Hello everyone. Purchased some rear drums, shoes, timken bearing's and seals for my mk2.
Little did I know there was two sizes and I bought the wrong ones. Well, I noticed after the bearings and stuff we're installed so it's a little late to return them.

I've got
Dura-Go drums 181mm,(appears to be 7inch inside diameter, 8 1/4 outside)
.Satisfied Metalazer Tech brake shoes 1.22 inch wide. Timken bearing's and seals.
Set1, Set8 and 1962 seal.

Looking to just try and recover some of my losses on parts I'll never use.
Everything is packed and carefully installed with a bearing driver. Just need a spring kit.

$30+ shipping(https://uploads.tapatalk-cdn.com/20180225/46fb1b7c54e854e2ad8d894e2711e5df.jpg)

Sent from my Pixel XL using Tapatalk

Title: For sale - Rear drums, shoes + brgs/seals for mk2
Post by: SpannerMonkey23 on February 25, 2018, 02:20:41 pm

Hello everyone. Purchased some rear drums, shoes, timken bearing's and seals for my mk2.
Little did I know there was two sizes and I bought the wrong ones. Well, I noticed after the bearings and stuff we're installed so it's a little late to return them.

I've got
Dura-Go drums 181mm,(appears to be 7inch inside diameter, 8 1/4 outside)
.Satisfied Metalazer Tech brake shoes 1.22 inch wide. Timken bearing's and seals.
Set1, Set8 and 1962 seal.

Looking to just try and recover some of my losses on parts I'll never use.
Everything is packed and carefully installed with a bearing driver. Just need a spring kit.

$30+ shipping. Can take more measurements or pictures if needed.
Thanks.
https://imgur.com/a/tOx6x

<blockquote class="imgur-embed-pub" lang="en" data-id="a/tOx6x"><a href="//imgur.com/tOx6x"></a></blockquote><script async src="//s.imgur.com/min/embed.js" charset="utf-8"></script>

Sent from my Pixel XL using Tapatalk

Title: For sale - Rear drums, shoes + brgs/seals for mk2
Post by: SpannerMonkey23 on February 25, 2018, 02:20:53 pm

Hello everyone. Purchased some rear drums, shoes, timken bearing's and seals for my mk2.
Little did I know there was two sizes and I bought the wrong ones. Well, I noticed after the bearings and stuff we're installed so it's a little late to return them.

I've got
Dura-Go drums 181mm,(appears to be 7inch inside diameter, 8 1/4 outside)
.Satisfied Metalazer Tech brake shoes 1.22 inch wide. Timken bearing's and seals.
Set1, Set8 and 1962 seal.

Looking to just try and recover some of my losses on parts I'll never use.
Everything is packed and carefully installed with a bearing driver. Just need a spring kit.

$30+ shipping. Can take more measurements or pictures if needed.
Thanks.
https://imgur.com/a/tOx6x

<blockquote class="imgur-embed-pub" lang="en" data-id="a/tOx6x"><a href="//imgur.com/tOx6x"></a></blockquote><script async src="//s.imgur.com/min/embed.js" charset="utf-8"></script>(https://uploads.tapatalk-cdn.com/20180225/c53b22299ca6e5000967bc13a27a7741.jpg)

Sent from my Pixel XL using Tapatalk

Title: Mk2 rear brakes
Post by: SpannerMonkey23 on February 25, 2018, 02:21:23 pm

Hello everyone. Purchased some rear drums, shoes, timken bearing's and seals for my mk2.
Little did I know there was two sizes and I bought the wrong ones. Well, I noticed after the bearings and stuff we're installed so it's a little late to return them.

I've got
Dura-Go drums 181mm,(appears to be 7inch inside diameter, 8 1/4 outside)
.Satisfied Metalazer Tech brake shoes 1.22 inch wide. Timken bearing's and seals.
Set1, Set8 and 1962 seal.

Looking to just try and recover some of my losses on parts I'll never use.
Everything is packed and carefully installed with a bearing driver. Just need a spring kit.

$30+ shipping. Can take more measurements or pictures if needed.
Thanks.
https://imgur.com/a/tOx6x

<blockquote class="imgur-embed-pub" lang="en" data-id="a/tOx6x"><a href="//imgur.com/tOx6x"></a></blockquote><script async src="//s.imgur.com/min/embed.js" charset="utf-8"></script>

Sent from my Pixel XL using Tapatalk

Title: FS: mk2 rear brakes
Post by: SpannerMonkey23 on February 25, 2018, 02:22:00 pm

Hello everyone. Purchased some rear drums, shoes, timken bearing's and seals for my mk2.
Little did I know there was two sizes and I bought the wrong ones. Well, I noticed after the bearings and stuff we're installed so it's a little late to return them.

I've got
Dura-Go drums 181mm,(appears to be 7inch inside diameter, 8 1/4 outside)
.Satisfied Metalazer Tech brake shoes 1.22 inch wide. Timken bearing's and seals.
Set1, Set8 and 1962 seal.

Looking to just try and recover some of my losses on parts I'll never use.
Everything is packed and carefully installed with a bearing driver. Just need a spring kit.

$30+ shipping. Can take more measurements or pictures if needed.
Thanks.
https://imgur.com/a/tOx6x

<blockquote class="imgur-embed-pub" lang="en" data-id="a/tOx6x"><a href="//imgur.com/tOx6x"></a></blockquote><script async src="//s.imgur.com/min/embed.js" charset="utf-8"></script>

Sent from my Pixel XL using Tapatalk

Title: FS: mk2 rear brakes
Post by: SpannerMonkey23 on February 25, 2018, 02:22:09 pm

Hello everyone. Purchased some rear drums, shoes, timken bearing's and seals for my mk2.
Little did I know there was two sizes and I bought the wrong ones. Well, I noticed after the bearings and stuff we're installed so it's a little late to return them.

I've got
Dura-Go drums 181mm,(appears to be 7inch inside diameter, 8 1/4 outside)
.Satisfied Metalazer Tech brake shoes 1.22 inch wide. Timken bearing's and seals.
Set1, Set8 and 1962 seal.

Looking to just try and recover some of my losses on parts I'll never use.
Everything is packed and carefully installed with a bearing driver. Just need a spring kit.

$30+ shipping. Can take more measurements or pictures if needed.
Thanks.
https://imgur.com/a/tOx6x


Sent from my Pixel XL using Tapatalk

Title: 1998 jetta defuel/power loss??
Post by: keeganp2011 on April 23, 2018, 12:34:47 pm

Any time I go over 70 I lose power possibly it is a defuel not sure if I punch it at 55 I can get it up to 85 but after a mile the car slows itself to 70 and just keeps slowing down every once in a while it will throw code p2135 throttle positioning sensor but other current codes are p1550 and p0380... any ideas?

Sent from my SM-G950U using Tapatalk

Title: 1998 jetta defuel/power loss??
Post by: keeganp2011 on April 23, 2018, 12:34:57 pm

Any time I go over 70 I lose power possibly it is a defuel not sure if I punch it at 55 I can get it up to 85 but after a mile the car slows itself to 70 and just keeps slowing down every once in a while it will throw code p2135 throttle positioning sensor but other current codes are p1550 and p0380... any ideas?

Sent from my SM-G950U using Tapatalk

Title: 1998 jetta defuel/power loss??
Post by: keeganp2011 on April 23, 2018, 12:35:04 pm

Any time I go over 70 I lose power possibly it is a defuel not sure if I punch it at 55 I can get it up to 85 but after a mile the car slows itself to 70 and just keeps slowing down every once in a while it will throw code p2135 throttle positioning sensor but other current codes are p1550 and p0380... any ideas?

Sent from my SM-G950U using Tapatalk

Title: 1998 jetta defuel/power loss??
Post by: keeganp2011 on April 23, 2018, 12:35:30 pm

Any time I go over 70 I lose power possibly it is a defuel not sure if I punch it at 55 I can get it up to 85 but after a mile the car slows itself to 70 and just keeps slowing down every once in a while it will throw code p2135 throttle positioning sensor but other current codes are p1550 and p0380... any ideas?

Sent from my SM-G950U using Tapatalk

Title: 1998 jetta defuel/power loss??
Post by: keeganp2011 on April 23, 2018, 12:36:06 pm

Any time I go over 70 I lose power possibly it is a defuel not sure if I punch it at 55 I can get it up to 85 but after a mile the car slows itself to 70 and just keeps slowing down every once in a while it will throw code p2135 throttle positioning sensor but other current codes are p1550 and p0380... any ideas?

Sent from my SM-G950U using Tapatalk

Title: 1998 jetta defuel/power loss??
Post by: keeganp2011 on April 23, 2018, 12:36:30 pm

Any time I go over 70 I lose power possibly it is a defuel not sure if I punch it at 55 I can get it up to 85 but after a mile the car slows itself to 70 and just keeps slowing down every once in a while it will throw code p2135 throttle positioning sensor but other current codes are p1550 and p0380... any ideas?

Sent from my SM-G950U using Tapatalk

Title: 1998 jetta defuel/power loss??
Post by: keeganp2011 on April 23, 2018, 12:36:40 pm

Any time I go over 70 I lose power possibly it is a defuel not sure if I punch it at 55 I can get it up to 85 but after a mile the car slows itself to 70 and just keeps slowing down every once in a while it will throw code p2135 throttle positioning sensor but other current codes are p1550 and p0380... any ideas?

Sent from my SM-G950U using Tapatalk

Title: 1998 jetta defuel/power loss??
Post by: keeganp2011 on April 23, 2018, 12:38:31 pm

Any time I go over 70 I lose power possibly it is a defuel not sure if I punch it at 55 I can get it up to 85 but after a mile the car slows itself to 70 and just keeps slowing down every once in a while it will throw code p2135 throttle positioning sensor but other current codes are p1550 and p0380... any ideas? (https://uploads.tapatalk-cdn.com/20180423/e74d54fb5f6d5131f0f6daa8a0f2b650.jpg)(https://uploads.tapatalk-cdn.com/20180423/3b576d601248b32853f57fc68c23b935.jpg)(https://uploads.tapatalk-cdn.com/20180423/60d1c0aff8474a45dffe8114661683c2.jpg)

Sent from my SM-G950U using Tapatalk

Title: 1998 jetta defuel/power loss??
Post by: keeganp2011 on April 23, 2018, 12:38:37 pm

Any time I go over 70 I lose power possibly it is a defuel not sure if I punch it at 55 I can get it up to 85 but after a mile the car slows itself to 70 and just keeps slowing down every once in a while it will throw code p2135 throttle positioning sensor but other current codes are p1550 and p0380... any ideas? (https://uploads.tapatalk-cdn.com/20180423/e74d54fb5f6d5131f0f6daa8a0f2b650.jpg)(https://uploads.tapatalk-cdn.com/20180423/3b576d601248b32853f57fc68c23b935.jpg)(https://uploads.tapatalk-cdn.com/20180423/60d1c0aff8474a45dffe8114661683c2.jpg)

Sent from my SM-G950U using Tapatalk

Title: 1998 jetta defuel/power loss??
Post by: keeganp2011 on April 23, 2018, 12:38:48 pm

Any time I go over 70 I lose power possibly it is a defuel not sure if I punch it at 55 I can get it up to 85 but after a mile the car slows itself to 70 and just keeps slowing down every once in a while it will throw code p2135 throttle positioning sensor but other current codes are p1550 and p0380. any ideas? (https://uploads.tapatalk-cdn.com/20180423/e74d54fb5f6d5131f0f6daa8a0f2b650.jpg)(https://uploads.tapatalk-cdn.com/20180423/3b576d601248b32853f57fc68c23b935.jpg)(https://uploads.tapatalk-cdn.com/20180423/60d1c0aff8474a45dffe8114661683c2.jpg)

Sent from my SM-G950U using Tapatalk

Title: 1998 jetta defuel/power loss??
Post by: keeganp2011 on April 23, 2018, 12:39:21 pm

Any time I go over 70 I lose power possibly it is a defuel not sure if I punch it at 55 I can get it up to 85 but after a mile the car slows itself to 70 and just keeps slowing down every once in a while it will throw code p2135 throttle positioning sensor but other current codes are p1550 and p0380... any ideas?

Sent from my SM-G950U using Tapatalk

Title: 1998 jetta defuel/power loss??
Post by: keeganp2011 on April 23, 2018, 12:40:06 pm

Any time I go over 70 I lose power. If I punch it at 55 I can get it up to 85 but after a mile the car slows itself to 70 and just keeps slowing down every once in a while it will throw code p2135 throttle positioning sensor but other current codes are p1550 and p0380... any ideas?

Sent from my SM-G950U using Tapatalk

Title: 1998 jetta defuel/power loss??
Post by: keeganp2011 on April 23, 2018, 12:40:52 pm

Any time I go over 70 I lose power. If I punch it at 55 I can get it up to 85 but after a mile the car slows itself to 70 and just keeps slowing down.

Every once in a while it will throw code p2135 throttle positioning sensor but other current codes are p1550 and p0380.

Any ideas?

Sent from my SM-G950U using Tapatalk

Title: WTB: VW MK1 RABBIT 81-84 L+R Tail Light Assembly
Post by: dailydubber on May 01, 2018, 08:32:35 pm

Just as title says, I'm looking for a pair of tail lamp assembly for my 1981 Rabbit Diesel. I've searched online but they're out of stock or no longer available. Preferably minor to no cracks. Let me know price shipped to 21061 Maryland

Sent from my HTC6545LVW using Tapatalk

Title: WTB: VW MK1 RABBIT 81-84 L+R Tail Light Assembly
Post by: dailydubber on May 01, 2018, 08:32:45 pm

Just as title says, I'm looking for a pair of tail lamp assembly for my 1981 Rabbit Diesel. I've searched online but they're out of stock or no longer available. Preferably minor to no cracks. Let me know price shipped to 21061 Maryland.

Sent from my HTC6545LVW using Tapatalk

Title: WTB: VW MK1 RABBIT 81-84 L+R Tail Light Assembly
Post by: dailydubber on May 01, 2018, 08:33:07 pm

Just as title says, I'm looking for a pair of tail lamp assembly for my 1981 Rabbit Diesel. I've searched online but they're out of stock or no longer available. Preferably minor to no cracks. Let me know price shipped to 21061 Maryland.

Sent from my HTC6545LVW using Tapatalk

Title: WTB: VW MK1 RABBIT 81-84 L+R Tail Light Assembly
Post by: dailydubber on May 01, 2018, 08:33:28 pm

Just as title says, I'm looking for a pair of tail lamp assembly for my 1981 Rabbit Diesel. I've searched online but they're out of stock or no longer available. Preferably minor to no cracks. Let me know price shipped to 21061 Maryland.

Sent from my HTC6545LVW using Tapatalk

Title: WTB: VW MK1 RABBIT 81-84 L+R Tail Light Assembly
Post by: dailydubber on May 01, 2018, 08:35:40 pm

Just as title says, I'm looking for a pair of tail lamp assembly for my 1981 Rabbit Diesel. I've searched online but they're out of stock or no longer available. Preferably minor to no cracks. Let me know price shipped to 21061 Maryland.(https://uploads.tapatalk-cdn.com/20180502/4130c455fdb0b5bf7cf82a3816af2263.jpg)

Sent from my HTC6545LVW using Tapatalk

Title: VW MK1 RABBIT TAIL LIGHT ASSEMBLY
Post by: dailydubber on May 01, 2018, 08:36:26 pm

Just as title says, I'm looking for a pair of tail lamp assembly for my 1981 Rabbit Diesel. I've searched online but they're out of stock or no longer available. Preferably minor to no cracks. Let me know price shipped to 21061 Maryland

Sent from my HTC6545LVW using Tapatalk

Title: VW MK1 RABBIT TAIL LIGHT ASSEMBLY
Post by: dailydubber on May 02, 2018, 07:19:39 am

Just as title says, I'm looking for a pair of tail lamp assembly for my 1981 Rabbit Diesel. I've searched online but they're out of stock or no longer available. Preferably minor to no cracks. Let me know price shipped to 21061 Maryland. Thank you.

Sent from my HTC6545LVW using Tapatalk

Title: VW MK1 RABBIT TAIL LIGHT ASSEMBLY
Post by: dailydubber on May 02, 2018, 07:19:52 am

Just as title says, I'm looking for a pair of tail lamp assembly for my 1981 Rabbit Diesel. I've searched online but they're out of stock or no longer available. Preferably minor to no cracks. Let me know price shipped to 21061 Maryland. Thank you.

Sent from my HTC6545LVW using Tapatalk

Title: WTB: VW MK1 Tail light assembly
Post by: dailydubber on May 02, 2018, 11:40:12 am

I'm looking for a pair of tail light assembly for my 4-door VW Rabbit Diesel. Preferably minor cracks to no cracks. I've searched online but they're out of stock or no longer available. Please let me know shipped to 21061 Maryland USA. Thank you.

Sent from my HTC6545LVW using Tapatalk

Title: WTB: VW MK1 Tail light assembly
Post by: dailydubber on May 02, 2018, 11:40:19 am

I'm looking for a pair of tail light assembly for my 4-door VW Rabbit Diesel. Preferably minor cracks to no cracks. I've searched online but they're out of stock or no longer available. Please let me know shipped to 21061 Maryland USA. Thank you.

Sent from my HTC6545LVW using Tapatalk

Title: WTB: VW MK1 Tail light assembly
Post by: dailydubber on May 02, 2018, 11:40:33 am

I'm looking for a pair of tail light assembly for my 4-door VW Rabbit Diesel. Preferably minor cracks to no cracks. I've searched online but they're out of stock or no longer available. Please let me know shipped to 21061 Maryland USA. Thank you.(https://uploads.tapatalk-cdn.com/20180502/31c68854642c9ed0578f1cb360b0e272.jpg)

Sent from my HTC6545LVW using Tapatalk

Title: WTB: VW MK1 Tail light assembly
Post by: dailydubber on May 02, 2018, 11:40:45 am

I'm looking for a pair of tail light assembly for my 4-door VW Rabbit Diesel. Preferably minor cracks to no cracks. I've searched online but they're out of stock or no longer available. Please let me know shipped to 21061 Maryland USA. Thank you.(https://uploads.tapatalk-cdn.com/20180502/ac138222cda4c2684c6e56784b7060ce.jpg)

Sent from my HTC6545LVW using Tapatalk

Title: WTB: VW MK1 Tail light assembly
Post by: dailydubber on May 02, 2018, 11:40:53 am

I'm looking for a pair of tail light assembly for my 4-door VW Rabbit Diesel. Preferably minor cracks to no cracks. I've searched online but they're out of stock or no longer available. Please let me know shipped to 21061 Maryland USA. Thank you.(https://uploads.tapatalk-cdn.com/20180502/ac138222cda4c2684c6e56784b7060ce.jpg)

Sent from my HTC6545LVW using Tapatalk

Title: Dipsticks
Post by: Ian0391 on May 23, 2018, 12:28:41 pm

Can I use an alh dipstick and tube in am ahu/1z block?

Sent from my Pixel 2 using Tapatalk

Title: Dipsticks
Post by: Ian0391 on May 23, 2018, 12:28:53 pm

Can I use an alh dipstick and tube in am ahu/1z block?

Sent from my Pixel 2 using Tapatalk

Title: Dipstick tube
Post by: Ian0391 on May 23, 2018, 12:39:17 pm

Is it possible to swap an alh dipstick assembly onto a 1z/ahu block?

Sent from my Pixel 2 using Tapatalk

Title: ALH Swap w/clutch cable in SE CT $1000
Post by: Turbofan on July 12, 2018, 07:15:00 am

A few years ago, I bought a 98 Beetle TDI for the express purpose of harvesting the engine/drivetrain to swap into my MK2. I also sourced a cable clutch setup from Germany, to speed up the process. Shortly there after, my first son was born, and free time went bye bye. I ended up selling the car in 2016, but held onto the swap.

The motor and transmission (02J) have about 163k on them, and I replaced the timing belt, tensioner, roller, and waterpump after pulling the motor. Also included is ecu, 2 engine wiring harnesses, a chassis harness, cluster (not needed- no immo in 98), shifter assembly, intercooler, radiator, and motor accessories. I've got several rubbermaid tubs of parts, and I'm sure there is even more in there. I'm located in Westport, CT, 06880. I'm happy to deliver this stuff within a reasonable distance in the chance you don't have a truck. I'd like to see this stuff get used! Let me know if you have questions.

P.S. I will only sell the cable clutch setup w/o the engine if the engine sells first,  and the buyer doesn't want it!

Thanks for looking! (https://uploads.tapatalk-cdn.com/20180712/147ef70d62bb1d2254bdfa7e887149ce.jpg)(https://uploads.tapatalk-cdn.com/20180712/7dcb2830a1dd066dc81118379f4d67e6.jpg)(https://uploads.tapatalk-cdn.com/20180712/62b23f229d5225dcbad5408ae64b1f22.jpg)(https://uploads.tapatalk-cdn.com/20180712/a8296d4d326dc2f5abbab07f1cf0beeb.jpg)

Title: ALH Swap w/clutch cable in SE CT $1000
Post by: Turbofan on July 12, 2018, 07:29:35 am

A few years ago, I bought a 98 Beetle TDI for the express purpose of harvesting the engine/drivetrain to swap into my MK2. I also sourced a cable clutch setup from Germany, to speed up the process. Shortly there after, my first son was born, and free time went bye bye. I ended up selling the car in 2016, but held onto the swap.

The motor and transmission (02J) have about 163k on them, and I replaced the timing belt, tensioner, roller, and waterpump after pulling the motor. Also included is ecu, 2 engine wiring harnesses, a chassis harness, cluster (not needed- no immo in 98), shifter assembly, intercooler, radiator, and motor accessories. I've got several rubbermaid tubs of parts, and I'm sure there is even more in there. I'm located in Westport, CT, 06880. I'm happy to deliver this stuff within a reasonable distance in the chance you don't have a truck. I'd like to see this stuff get used! Let me know if you have questions.

P.S. I will only sell the cable clutch setup w/o the engine if the engine sells first,  and the buyer doesn't want it!

Thanks for looking!

Title: ALH Swap w/clutch cable in SE CT $1000
Post by: Turbofan on July 12, 2018, 11:11:52 pm

A few years ago, I bought a 98 Beetle TDI for the express purpose of harvesting the engine/drivetrain to swap into my MK2. I also sourced a cable clutch setup from Germany, to speed up the process. Shortly there after, my first son was born, and free time went bye bye. I ended up selling the car in 2016, but held onto the swap.

The motor and transmission have about 163k on them, and I replaced the timing belt, tensioner, roller, and waterpump after pulling the motor. Also included is ecu (80 pin), 2 engine wiring harnesses, a chassis harness, cluster (not needed- no immo in 98), shifter assembly, intercooler, radiator, Bentley Beetle Bible, and motor accessories. Also included is a rear 02a transmission bracket to aid mounting in a Mk1/2. I've got several rubbermaid tubs of parts, and I'm sure there is even more in there. I'm located in Westport, CT, 06880. I'm happy to deliver this stuff within a reasonable distance in the chance you don't have a truck. I'd like to see this stuff get used! Let me know if you have questions.

P.S. I will only sell the cable clutch setup w/o the engine if the engine sells first,  and the buyer doesn't want it!

Thanks for looking! (https://uploads.tapatalk-cdn.com/20180713/5303912e141a22099f84bcbc8e98c05f.jpg)(https://uploads.tapatalk-cdn.com/20180713/16cb4529d353920875ce04286705d6e5.jpg)(https://uploads.tapatalk-cdn.com/20180713/f4e1e5425e68f35d7a828dda40caac7e.jpg)(https://uploads.tapatalk-cdn.com/20180713/ffa488621a6cd5ac7cd5b73d8c4595f1.jpg)(https://uploads.tapatalk-cdn.com/20180713/5bc81f1f4e84568c34364c7b8e74a9a8.jpg)(https://uploads.tapatalk-cdn.com/20180713/4b09ef020dcfa3c175a4bb0a9c96fb1a.jpg)(https://uploads.tapatalk-cdn.com/20180713/5b4eb8f7c444169a03da1743dbb6b3a9.jpg)(https://uploads.tapatalk-cdn.com/20180713/fcfc979049f23531bb90310c16a9355d.jpg)(https://uploads.tapatalk-cdn.com/20180713/f072703fb87bf54c9054eea83726d9fb.jpg)(https://uploads.tapatalk-cdn.com/20180713/d83a3a65e5acf1f527b803c02019e4e0.jpg)

Title: ALH Swap w/clutch cable in SE CT $1000
Post by: Turbofan on July 12, 2018, 11:12:00 pm

A few years ago, I bought a 98 Beetle TDI for the express purpose of harvesting the engine/drivetrain to swap into my MK2. I also sourced a cable clutch setup from Germany, to speed up the process. Shortly there after, my first son was born, and free time went bye bye. I ended up selling the car in 2016, but held onto the swap.

The motor and transmission have about 163k on them, and I replaced the timing belt, tensioner, roller, and waterpump after pulling the motor. Also included is ecu (80 pin), 2 engine wiring harnesses, a chassis harness, cluster (not needed- no immo in 98), shifter assembly, intercooler, radiator, Bentley Beetle Bible, and motor accessories. Also included is a rear 02a transmission bracket to aid mounting in a Mk1/2. I've got several rubbermaid tubs of parts, and I'm sure there is even more in there. I'm located in Westport, CT, 06880. I'm happy to deliver this stuff within a reasonable distance in the chance you don't have a truck. I'd like to see this stuff get used! Let me know if you have questions.

P.S. I will only sell the cable clutch setup w/o the engine if the engine sells first,  and the buyer doesn't want it!

Thanks for looking! (https://uploads.tapatalk-cdn.com/20180713/5303912e141a22099f84bcbc8e98c05f.jpg)(https://uploads.tapatalk-cdn.com/20180713/16cb4529d353920875ce04286705d6e5.jpg)(https://uploads.tapatalk-cdn.com/20180713/f4e1e5425e68f35d7a828dda40caac7e.jpg)(https://uploads.tapatalk-cdn.com/20180713/ffa488621a6cd5ac7cd5b73d8c4595f1.jpg)(https://uploads.tapatalk-cdn.com/20180713/5bc81f1f4e84568c34364c7b8e74a9a8.jpg)(https://uploads.tapatalk-cdn.com/20180713/4b09ef020dcfa3c175a4bb0a9c96fb1a.jpg)(https://uploads.tapatalk-cdn.com/20180713/5b4eb8f7c444169a03da1743dbb6b3a9.jpg)(https://uploads.tapatalk-cdn.com/20180713/fcfc979049f23531bb90310c16a9355d.jpg)(https://uploads.tapatalk-cdn.com/20180713/f072703fb87bf54c9054eea83726d9fb.jpg)(https://uploads.tapatalk-cdn.com/20180713/d83a3a65e5acf1f527b803c02019e4e0.jpg)

Title: FS: ALH TDI ENGINE
Post by: mrurbina on December 17, 2018, 05:34:28 pm

***SHIPPING OFFER IS FOR ANY BUSINESS ADDRESS INC. TERMINAL IN THE LOWER 48***

$1200


*******please message me if you intend on using a residential address*****


DONOR:*2003 VOLKSWAGEN JETTA TDI*

MILEAGE:*245K


WHAT'S INCLUDED:*COMPLETE ENGINE AS REMOVED*


CAN INCLUDE*ECU*AND*HARNESS*AT OFFERED PRICE !


DIRECT FIT FOR 1998-2003 GOLF JETTA AND BEETLE ALH*


(noise in video is the serp. belt*tensioner)

https://www.youtube.com/watch?v=g5yZHgZS_7A (https://www.youtube.com/watch?v=g5yZHgZS_7A)(https://uploads.tapatalk-cdn.com/20181217/10d3011904c9bc84c8e81421bc77414a.jpg)(https://uploads.tapatalk-cdn.com/20181217/c3455ca9fd0c4a5172ae3dc1cc60a558.jpg)


Sent from my SM-N950U using Tapatalk

Title: FS: ALH TDI ENGINE
Post by: mrurbina on December 17, 2018, 05:34:42 pm

***SHIPPING OFFER IS FOR ANY BUSINESS ADDRESS INC. TERMINAL IN THE LOWER 48***

$1200


*******please message me if you intend on using a residential address*****


DONOR:*2003 VOLKSWAGEN JETTA TDI*

MILEAGE:*245K


WHAT'S INCLUDED:*COMPLETE ENGINE AS REMOVED*


CAN INCLUDE*ECU*AND*HARNESS*AT OFFERED PRICE !


DIRECT FIT FOR 1998-2003 GOLF JETTA AND BEETLE ALH*


(noise in video is the serp. belt*tensioner)

https://www.youtube.com/watch?v=g5yZHgZS_7A (https://www.youtube.com/watch?v=g5yZHgZS_7A)(https://uploads.tapatalk-cdn.com/20181217/10d3011904c9bc84c8e81421bc77414a.jpg)(https://uploads.tapatalk-cdn.com/20181217/c3455ca9fd0c4a5172ae3dc1cc60a558.jpg)


Sent from my SM-N950U using Tapatalk

Title: FS: ALH TDI ENGINE
Post by: mrurbina on December 17, 2018, 05:35:15 pm

***SHIPPING OFFER IS FOR ANY BUSINESS ADDRESS INC. TERMINAL IN THE LOWER 48***

$1200


*******please message me if you intend on using a residential address*****


DONOR:*2003 VOLKSWAGEN JETTA TDI*

MILEAGE:*245K


WHAT'S INCLUDED:*COMPLETE ENGINE AS REMOVED*


CAN INCLUDE*ECU*AND*HARNESS*AT OFFERED PRICE !


DIRECT FIT FOR 1998-2003 GOLF JETTA AND BEETLE ALH*


(https://uploads.tapatalk-cdn.com/20181217/94fcd33252655bd207b6b503fa30f8e7.jpg)(https://uploads.tapatalk-cdn.com/20181217/b534357c119913146501db98319ba15d.jpg)(https://uploads.tapatalk-cdn.com/20181217/64b74697ee8e35faf720ba73a2b3e4dc.jpg)

Sent from my SM-N950U using Tapatalk

Title: FS: ALH ENGINE SWAP
Post by: mrurbina on December 17, 2018, 05:36:38 pm

***SHIPPING OFFER IS FOR ANY BUSINESS ADDRESS INC. TERMINAL IN THE LOWER 48***

$1200


*******please message me if you intend on using a residential address*****


DONOR:*2003 VOLKSWAGEN JETTA TDI*

MILEAGE:*245K


WHAT'S INCLUDED:*COMPLETE ENGINE AS REMOVED*


CAN INCLUDE*ECU*AND*HARNESS*AT OFFERED PRICE !


DIRECT FIT FOR 1998-2003 GOLF JETTA AND BEETLE ALH*


(noise in video is the serp. belt*tensioner)



Sent from my SM-N950U using Tapatalk

Title: AGR Engine with K24 Turbo (NO M-TDI)
Post by: DkmenchaR on March 10, 2019, 05:06:00 pm

I got a used KKK24 Turbo from a Audi90 1.6TD at junkyard, and I'm wondering if, this particular turbo will be a good upgrade to my VNT15!

I've got already a Remap with a VNT convertion, but can I swap this little turbo to the K24 easily and re-adjust my ECU? I don't want mechanical pump, and my power goals is around 160-170hp at the wheels (currently with 128whp and 317nm on dyno)

I know some TDI's come with Wastegsted turbos, and I know there are other turbo options for that power goal, but this seems to be a nice turbo, inspite of the age... Besides, I don't want to chance to another turbo (The less I spend, the better!)

Any recommendation is well welcome!(https://uploads.tapatalk-cdn.com/20190310/6589c1cd5a76252ecc850268394da225.jpg)(https://uploads.tapatalk-cdn.com/20190310/0eaf220a03d557bc53efc2128f681928.jpg)(https://uploads.tapatalk-cdn.com/20190310/3904c001e1a7722786fcfa75c3557736.jpg)

Enviado do meu SM-J500FN através do Tapatalk

Title: AGR Engine with K24 Turbo (NO M-TDI)
Post by: DkmenchaR on March 10, 2019, 05:06:24 pm

I got a used KKK24 Turbo from a Audi90 1.6TD at junkyard, and I'm wondering if, this particular turbo will be a good upgrade to my VNT15!

I've got already a Remap with a VNT convertion, but can I swap this little turbo to the K24 easily and re-adjust my ECU? I don't want mechanical pump, and my power goals is around 160-170hp at the wheels (currently with 128whp and 317nm on dyno)

I know some TDI's come with Wastegsted turbos, and I know there are other turbo options for that power goal, but this seems to be a nice turbo, inspite of the age... Besides, I don't want to chance to another turbo (The less I spend, the better!)

Any recommendation is well welcome!(https://uploads.tapatalk-cdn.com/20190310/6589c1cd5a76252ecc850268394da225.jpg)(https://uploads.tapatalk-cdn.com/20190310/0eaf220a03d557bc53efc2128f681928.jpg)(https://uploads.tapatalk-cdn.com/20190310/3904c001e1a7722786fcfa75c3557736.jpg)

Enviado do meu SM-J500FN através do Tapatalk

Title: AGR Engine with K24 Turbo (NO M-TDI)
Post by: DkmenchaR on March 10, 2019, 05:06:35 pm

I got a used KKK24 Turbo from a Audi90 1.6TD at junkyard, and I'm wondering if, this particular turbo will be a good upgrade to my VNT15!

I've got already a Remap with a VNT convertion, but can I swap this little turbo to the K24 easily and re-adjust my ECU? I don't want mechanical pump, and my power goals is around 160-170hp at the wheels (currently with 128whp and 317nm on dyno)

I know some TDI's come with Wastegsted turbos, and I know there are other turbo options for that power goal, but this seems to be a nice turbo, inspite of the age... Besides, I don't want to chance to another turbo (The less I spend, the better!)

Any recommendation is well welcome!

Enviado do meu SM-J500FN através do Tapatalk

Title: AGR Engine with K24 Turbo
Post by: DkmenchaR on March 10, 2019, 05:06:45 pm

I got a used KKK24 Turbo from a Audi90 1.6TD at junkyard, and I'm wondering if, this particular turbo will be a good upgrade to my VNT15!

I've got already a Remap with a VNT convertion, but can I swap this little turbo to the K24 easily and re-adjust my ECU? I don't want mechanical pump, and my power goals is around 160-170hp at the wheels (currently with 128whp and 317nm on dyno)

I know some TDI's come with Wastegsted turbos, and I know there are other turbo options for that power goal, but this seems to be a nice turbo, inspite of the age... Besides, I don't want to chance to another turbo (The less I spend, the better!)

Any recommendation is well welcome!

Enviado do meu SM-J500FN através do Tapatalk

Title: AGR Engine with K24 Turbo
Post by: DkmenchaR on March 10, 2019, 05:07:34 pm

I got a used KKK24 Turbo from a Audi90 1.6TD at junkyard, and I'm wondering if, this particular turbo will be a good upgrade to my VNT15!

I've got already a Remap with a VNT convertion, but can I swap this little turbo to the K24 easily and re-adjust my ECU? I don't want mechanical pump, and my power goals is around 160-170hp at the wheels (currently with 128whp and 317nm on dyno)

I know some TDI's come with Wastegsted turbos, and I know there are other turbo options for that power goal, but this seems to be a nice turbo, inspite of the age... Besides, I don't want to chance to another turbo (The less I spend, the better!)

Any recommendation is well welcome!

Enviado do meu SM-J500FN através do Tapatalk

Title: AGR Engine K24 Turbo Help
Post by: DkmenchaR on March 10, 2019, 05:09:30 pm

I got a used KKK24 Turbo from a Audi90 1.6TD at junkyard, and I'm wondering if, this particular turbo will be a good upgrade to my VNT15!

I've got already a Remap with a VNT convertion, but can I swap this little turbo to the K24 easily and re-adjust my ECU? I don't want mechanical pump, and my power goals is around 160-170hp at the wheels (currently with 128whp and 317nm on dyno)

I know some TDI's come with Wastegsted turbos, and I know there are other turbo options for that power goal, but this seems to be a nice turbo, inspite of the age... Besides, I don't want to chance to another turbo (The less I spend, the better!)

Any recommendation is well welcome!

Enviado do meu SM-J500FN através do Tapatalk

Title: AGR Engine K24 Turbo Help
Post by: DkmenchaR on March 10, 2019, 05:11:09 pm

I got a used KKK24 Turbo from a Audi90 1.6TD at junkyard, and I'm wondering if, this particular turbo will be a good upgrade to my VNT15!

I've got already a Remap with a VNT convertion, but can I swap this little turbo to the K24 easily and re-adjust my ECU? I don't want mechanical pump, and my power goals is around 160-170hp at the wheels (currently with 128whp and 317nm on dyno)

I know some TDI's come with Wastegsted turbos, and I know there are other turbo options for that power goal, but this seems to be a nice turbo, inspite of the age... Besides, I don't want to chance to another turbo (The less I spend, the better!)

Any recommendation is well welcome

Enviado do meu SM-J500FN através do Tapatalk

Title: AGR Engine K24 Turbo Help
Post by: DkmenchaR on March 10, 2019, 05:11:21 pm

I got a used KKK24 Turbo from a Audi90 1.6TD at junkyard, and I'm wondering if, this particular turbo will be a good upgrade to my VNT15!

I've got already a Remap with a VNT convertion, but can I swap this little turbo to the K24 easily and re-adjust my ECU? I don't want mechanical pump, and my power goals is around 160-170hp at the wheels (currently with 128whp and 317nm on dyno)

I know some TDI's come with Wastegsted turbos, and I know there are other turbo options for that power goal, but this seems to be a nice turbo, inspite of the age... Besides, I don't want to chance to another turbo (The less I spend, the better!)

Any recommendation is well welcome

Enviado do meu SM-J500FN através do Tapatalk

Title: AGR Engine K24 Turbo (NO M-TDI)
Post by: DkmenchaR on March 10, 2019, 05:13:18 pm

I got a used KKK24 Turbo from a Audi90 1.6TD at junkyard, and I'm wondering if, this particular turbo will be a good upgrade to my VNT15!

I've got already a Remap with a VNT convertion, but can I swap this little turbo to the K24 easily and re-adjust my ECU? I don't want mechanical pump, and my power goals is around 160-170hp at the wheels (currently with 128whp and 317nm on dyno)

I know some TDI's come with Wastegsted turbos, and I know there are other turbo options for that power goal, but this seems to be a nice turbo, inspite of the age... Besides, I don't want to chance to another turbo (The less I spend, the better!)

Any recommendation is well welcome!

Enviado do meu SM-J500FN através do Tapatalk

Title: AGR Engine K24 Turbo (NO M-TDI)
Post by: DkmenchaR on March 10, 2019, 05:35:33 pm

I got a used KKK24 Turbo from a Audi90 1.6TD at junkyard, and I'm wondering if, this particular turbo will be a good upgrade to my VNT15!

I've got already a Remap with a VNT convertion, but can I swap this little turbo to the K24 easily and re-adjust my ECU? I don't want mechanical pump, and my power goals is around 160-170hp at the wheels (currently with 128whp and 317nm on dyno)

I know some TDI's come with Wastegsted turbos, and I know there are other turbo options for that power goal, but this seems to be a nice turbo, inspite of the age... Besides, I don't want to chance to another turbo (The less I spend, the better!)

Any recommendation is well welcome!

Enviado do meu SM-J500FN através do Tapatalk

Title: AGR Engine K24 Turbo (NO M-TDI)
Post by: DkmenchaR on March 10, 2019, 05:35:53 pm

I got a used KKK24 Turbo from a Audi90 1.6TD at junkyard, and I'm wondering if, this particular turbo will be a good upgrade to my VNT15!

I know some TDI's come with Wastegsted turbos, and I know there are other turbo options for that power goal, but this seems to be a nice turbo, inspite of the age... Besides, I don't want to chance to another turbo (The less I spend, the better!)

Any recommendation is well welcome!

Enviado do meu SM-J500FN através do Tapatalk

Title: 1998 jetta ahu with 5th injector???
Post by: anchoredinchrist on April 11, 2019, 03:19:10 pm

I have a 1998 jetta tdi in the shop right now, it's my brother in law's, and I was doing the wheel bearings and etc. I noticed that there was a check engine light, so I hooked up autel and checked and got code 00309 which is for the fifth injector metering device. I thought that there must be something wrong, and so I looked and sure enough, there is a fifth injector setup on this car! I thought maybe someone had maybe swapped in an engine from a 1996 Passat, but it doesn't appear that it has been changed. I didn't run the engine numbers, but I wanted to know if anyone else has run into this, and how to delete it in the ecu. It has already had an egr delete and tune. Is there a way to shut it off in vag-com? Thanks!(https://uploads.tapatalk-cdn.com/20190411/557341bee2f222c13cb2de8dbf3e26c6.jpg)(https://uploads.tapatalk-cdn.com/20190411/dfaff2e5b0aa87cdfde88dce72a893e7.jpg)

Sent from my KYOCERA-E6790 using Tapatalk

Title: 1998 jetta ahu with 5th injector???
Post by: anchoredinchrist on April 11, 2019, 03:19:17 pm

I have a 1998 jetta tdi in the shop right now, it's my brother in law's, and I was doing the wheel bearings and etc. I noticed that there was a check engine light, so I hooked up autel and checked and got code 00309 which is for the fifth injector metering device. I thought that there must be something wrong, and so I looked and sure enough, there is a fifth injector setup on this car! I thought maybe someone had maybe swapped in an engine from a 1996 Passat, but it doesn't appear that it has been changed. I didn't run the engine numbers, but I wanted to know if anyone else has run into this, and how to delete it in the ecu. It has already had an egr delete and tune. Is there a way to shut it off in vag-com? Thanks!(https://uploads.tapatalk-cdn.com/20190411/557341bee2f222c13cb2de8dbf3e26c6.jpg)(https://uploads.tapatalk-cdn.com/20190411/dfaff2e5b0aa87cdfde88dce72a893e7.jpg)

Sent from my KYOCERA-E6790 using Tapatalk

Title: 1998 jetta ahu with 5th injector???
Post by: anchoredinchrist on April 11, 2019, 03:19:32 pm

I have a 1998 jetta tdi in the shop right now, it's my brother in law's, and I was doing the wheel bearings and etc. I noticed that there was a check engine light, so I hooked up autel and checked and got code 00309 which is for the fifth injector metering device. I thought that there must be something wrong, and so I looked and sure enough, there is a fifth injector setup on this car! I thought maybe someone had maybe swapped in an engine from a 1996 Passat, but it doesn't appear that it has been changed. I didn't run the engine numbers, but I wanted to know if anyone else has run into this, and how to delete it in the ecu. It has already had an egr delete and tune. Is there a way to shut it off in vag-com? Thanks! (https://uploads.tapatalk-cdn.com/20190411/557341bee2f222c13cb2de8dbf3e26c6.jpg)

Sent from my KYOCERA-E6790 using Tapatalk

Title: 1998 jetta ahu with 5th injector???
Post by: anchoredinchrist on April 11, 2019, 03:19:39 pm

I have a 1998 jetta tdi in the shop right now, it's my brother in law's, and I was doing the wheel bearings and etc. I noticed that there was a check engine light, so I hooked up autel and checked and got code 00309 which is for the fifth injector metering device. I thought that there must be something wrong, and so I looked and sure enough, there is a fifth injector setup on this car! I thought maybe someone had maybe swapped in an engine from a 1996 Passat, but it doesn't appear that it has been changed. I didn't run the engine numbers, but I wanted to know if anyone else has run into this, and how to delete it in the ecu. It has already had an egr delete and tune. Is there a way to shut it off in vag-com? Thanks!

Sent from my KYOCERA-E6790 using Tapatalk

Title: 1998 jetta ahu with 5th injector?
Post by: anchoredinchrist on April 11, 2019, 03:19:46 pm

I have a 1998 jetta tdi in the shop right now, it's my brother in law's, and I was doing the wheel bearings and etc. I noticed that there was a check engine light, so I hooked up autel and checked and got code 00309 which is for the fifth injector metering device. I thought that there must be something wrong, and so I looked and sure enough, there is a fifth injector setup on this car! I thought maybe someone had maybe swapped in an engine from a 1996 Passat, but it doesn't appear that it has been changed. I didn't run the engine numbers, but I wanted to know if anyone else has run into this, and how to delete it in the ecu. It has already had an egr delete and tune. Is there a way to shut it off in vag-com? Thanks!

Sent from my KYOCERA-E6790 using Tapatalk

Title: 1998 jetta ahu with 5th injector?
Post by: anchoredinchrist on April 11, 2019, 03:20:01 pm

I have a 1998 jetta tdi in the shop right now, it's my brother in law's, and I was doing the wheel bearings and etc. I noticed that there was a check engine light, so I hooked up autel and checked and got code 00309 which is for the fifth injector metering device. I thought that there must be something wrong, and so I looked and sure enough, there is a fifth injector setup on this car! I thought maybe someone had maybe swapped in an engine from a 1996 Passat, but it doesn't appear that it has been changed. I didn't run the engine numbers, but I wanted to know if anyone else has run into this, and how to delete it in the ecu. It has already had an egr delete and tune. Is there a way to shut it off in vag-com? Thanks!

Sent from my KYOCERA-E6790 using Tapatalk

Title: Power upgrades
Post by: nathancadman98 on April 18, 2019, 01:18:10 pm

Anyone able to give me a rough number of what power a 1.9tdi AGR 90 can handle before it would need "major" engine work? I've got a bigger turbo, 12mm pump, nozzles, front mount, cam upgrade along with spring upgrade, thicker headgasket and arp head studs, it's all piled up ready to be fitted but want to know what sort of power this engine will hold before pistons and rods will need attention, if it isn't worth looking past the bottom end then I will just rebuild that too.

Sent from my SM-N9005 using Tapatalk

Title: Power upgrades
Post by: nathancadman98 on April 18, 2019, 01:18:27 pm

Anyone able to give me a rough number of what power a 1.9tdi AGR 90 can handle before it would need "major" engine work? I've got a bigger turbo, 12mm pump, nozzles, front mount, cam upgrade along with spring upgrade, thicker headgasket and arp head studs, it's all piled up ready to be fitted but want to know what sort of power this engine will hold before pistons and rods will need attention, if it isn't worth looking past the bottom end then I will just rebuild that too.

Sent from my SM-N9005 using Tapatalk

Title: Power upgrades
Post by: nathancadman98 on April 18, 2019, 01:18:46 pm

Anyone able to give me a rough number of what power a 1.9tdi AGR 90 can handle before it would need major engine work? I've got a bigger turbo, 12mm pump, nozzles, front mount, cam upgrade along with spring upgrade, thicker headgasket and arp head studs, it's all piled up ready to be fitted but want to know what sort of power this engine will hold before pistons and rods will need attention, if it isn't worth looking past the bottom end then I will just rebuild that too.

Sent from my SM-N9005 using Tapatalk

Title: Power upgrades
Post by: nathancadman98 on April 18, 2019, 01:19:19 pm

Anyone able to give me a rough number of what power a 1.9tdi AGR 90 can handle before it would need "major"engine work? I've got a bigger turbo, 12mm pump, nozzles, front mount, cam upgrade along with spring upgrade, thicker headgasket and arp head studs, it's all piled up ready to be fitted but want to know what sort of power this engine will hold before pistons and rods will need attention, if it isn't worth looking past the bottom end then I will just rebuild that too.

Sent from my SM-N9005 using Tapatalk

Title: Power
Post by: nathancadman98 on April 18, 2019, 01:21:27 pm

Anyone know what a VE 90bhp tdi will tune to before the block would need major upgrades?

Sent from my SM-N9005 using Tapatalk

Title: Mine
Post by: nathancadman98 on April 18, 2019, 02:03:20 pm

2001 seat cordoba estate 1.9tdi, anyone know what power the 90bhp VE engine will take before rods and pistons become external parts? Haha(https://uploads.tapatalk-cdn.com/20190418/99f50beb5b59eee563f101f65580b80e.jpg)

Sent from my SM-N9005 using Tapatalk