VWDiesel.net The IDI, TDI, and mTDI source.

Engine Specific Info and Questions => IDI Engine => Topic started by: Bigmick77380 on April 16, 2019, 02:50:22 pm

Title: What pump for old style 10mm head ?
Post by: Bigmick77380 on April 16, 2019, 02:50:22 pm

Hi guys,

I'm looking for a 10mm head that fit on the old style camplate (like 1.6 or early AAZ).
Somebody know on what pump i can find one of these ?

Have nice day

Title: Re: What pump for old style 10mm head ?
Post by: RustyCaddy on April 20, 2019, 03:17:18 pm

Maybe check this thread (IIRC it has links to other info if they are not dead):

http://forums.tdiclub.com/showthread.php?t=404118

Have read a good match is a AAZ camplate and 10mm AHU plunger/distributive head.

Title: Re: What pump for old style 10mm head ?
Post by: Bigmick77380 on April 23, 2019, 04:48:05 pm

First, thank's for the answer !

I already read this thread, and it's not exactly what i'm talking about.
Tdi plunger (1z/ahu/afn/...) don't fit the early aaz camplate, they have like 0.4 mm difference of diameter, and the camplate pin have a diameter difference too...
 So i search a 10mm distributor that fit into my aaz camplate

Title: Re: What pump for old style 10mm head ?
Post by: Buji88 on April 24, 2019, 11:57:22 am

I've heard the early pumps are a bit harder to find parts for. There may be some options out of Europe. I would suggest pulling the part number off your casing and comparing it to other Bosch units. When I broke my throttle shaft I learned a bit about how important the part numbers are and how hard it can be to find a reliable source, but I guarantee there are other units outside of VW that will work.