VWDiesel.net The IDI, TDI, and mTDI source.

For Sale/Looking For => Parts for Sale/Wanted => Topic started by: ezekiel on September 20, 2008, 07:45:33 pm

Title: *SOLD* FS: 1.9 m-TDI 0-miles *SOLD*
Post by: ezekiel on September 20, 2008, 07:45:33 pm
SOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLD
SOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLD
SOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLD

Selling the TDI engine I've been working on for about 2 years now.

It WAS a 1.9 AAZ TD, it was converted to TDI when I couldn't find oversized TD pistons, but could easily find ALH pistons.

I'm going to try and list everything I can remember off the top of my head:

-Neural brand .5over AHL pistons.
-Rods were cleaned, checked, and new bushings put in
-crank was checked and polished
-new crank and rod bearings (kolbenschmidt, 6 piece mains)
-rebuilt TDI head (from the dude on TDIclub, the head is beautiful)
-all the gaskets have been replaced
-new pan with metal baffle/scraper gasket
-new timing belt, tensioner, and crank gear
-TDI injectors w/ Sprint 520s
-new oil pump
-Valve cover and proper injection lines are in my possession

iffy things:
-AAZ pump is unknown condition, bought it off eBay, never ran it on anything, also needs to be modified to TDIm, but I have a Cummins 4B pump to go with it, so you can pull the camplate from that. Also have a new 11mm pump head to put on too
-crank nose is obviously AAZ, but it is in good un-wobbled condition, it has a new bolt, properly torqued, so unless you're putting A/C on it, you will have zero problems, and even if you do put A/C on it, you probably won't have problems still.
-no turbo
-no intake manifold (I can include the G60 manifold I have, though, but the ports will need to be opened up)
-because it's an AAZ block and crank, it doesn't have the TDI crank sensor, therefor it cannot be used as a TDI unless you add an external crank angle sensor.

Asking $1200
Transmission is SOLD

thanks

will ship freight at buyers expense, local pickup obviously preferred.

reply here, PM, or email xerography11 [at] yahoo [dot] com

--Justin
Title: *SOLD* FS: 1.9 m-TDI 0-miles *SOLD*
Post by: ezekiel on September 20, 2008, 07:51:26 pm
I also have a CTN 02A transmission that I'm willing to sell, can work out a price for both if interested.
Title: *SOLD* FS: 1.9 m-TDI 0-miles *SOLD*
Post by: RabbitGTDguy on September 20, 2008, 08:27:18 pm
This is a good deal for someone looking for a motor rebuilt with GOOD quality parts. I can tell you that the parts add up in price but that they are worth the piece of mind! *can attest to that with the mk1 mTDI build and the current b3 build*.

Someone will snag this....

Fuslit on here may have the misc. pieces someone needs to finish this as he has a 1z/AHU motor that he is going to go ahead and part out. Parts like the valve cover, an oil pump...even a true 1z/AHU crank....he would have those if someone wanted to buy them to finish this off with TDI parts

Joe
Title: *SOLD* FS: 1.9 m-TDI 0-miles *SOLD*
Post by: ezekiel on September 22, 2008, 08:00:18 pm
bump  8)
Title: *SOLD* FS: 1.9 m-TDI 0-miles *SOLD*
Post by: ezekiel on November 15, 2008, 01:32:24 pm
price dropped to $1500

now includes the CTN Transmission

and made some edits that are in italics

new oil pump
proper injector lines
valve cover

thanks!

--Justin
Title: *SOLD* FS: 1.9 m-TDI 0-miles *SOLD*
Post by: jtanguay on November 15, 2008, 01:43:14 pm
if anyones thinking of getting an m-TDI, this is the way to go... deals like this just don't come up very often, and i'm sure he has well over $1500 into this!!!

i have well into $3500+ into mine, and thats without a transmission!!!
Title: *SOLD* FS: 1.9 m-TDI 0-miles *SOLD*
Post by: burn_your_money on November 15, 2008, 04:25:04 pm
I wish you were closer....
Title: *SOLD* FS: 1.9 m-TDI 0-miles *SOLD*
Post by: rallydiesel on November 15, 2008, 04:29:28 pm
Very good deal.
Title: *SOLD* FS: 1.9 m-TDI 0-miles *SOLD*
Post by: ezekiel on November 15, 2008, 05:08:15 pm
Quote from: "burn_your_money"
I wish you were closer....


I know it wouldn't make it that much easier as far as cost, but I've got friends in Canadia that I'd be willing to drive the 3 hours to see, and could freight it while in Canadia, so the border wouldn't have to be dealt with

but it'd still be Vancity to Ontario.   :x
Title: *SOLD* FS: 1.9 m-TDI 0-miles *SOLD*
Post by: ezekiel on February 21, 2009, 05:50:28 pm
I'm listing this again since I can't think of any use for it anymore.  I can't even get my 1.6TD to run  :roll:

As such, I've dropped the price again, I know the economy blows, but maybe someone is in the market.

 :D

--Justin
Title: *SOLD* FS: 1.9 m-TDI 0-miles *SOLD*
Post by: Luckypabst on February 21, 2009, 07:35:25 pm
Could you get an estimate to haul the thing to SoCal, either 92627 or 93545?

Thanks
Chris
Title: *SOLD* FS: 1.9 m-TDI 0-miles *SOLD*
Post by: ezekiel on February 21, 2009, 11:09:03 pm
I'll figure that stuff out and leave the office lady at my work an email to see if she can get me a quote.

Can it be shipped to somewhere with a forklift or loading dock?
Title: *SOLD* FS: 1.9 m-TDI 0-miles *SOLD*
Post by: patracy on February 22, 2009, 09:57:08 am
Could I get a quote as well shipped to 30339.  Commercial loading dock.

Edit: without the transmission.
Title: *SOLD* FS: 1.9 m-TDI 0-miles *SOLD*
Post by: ezekiel on February 22, 2009, 01:50:01 pm
I just checked vwmotors on eBay to see what they charge for freight, the 1.6td in my caddy came from them.

They are charging $350-450 to the lower 48.  Plus $100 if it's residential.

I'm going to say $350 to CA if it's to a place with a forklift.

$400 to Georgia.

That should cover making the pallet as well.

If it's less I'll refund the difference, if it's more I'll eat the difference.

--Justin
Title: *SOLD* FS: 1.9 m-TDI 0-miles *SOLD*
Post by: RabbitJockey on February 22, 2009, 03:00:54 pm
i believe i have the original aaz head from this motor
Title: *SOLD* FS: 1.9 m-TDI 0-miles *SOLD*
Post by: RabbitGTDguy on February 22, 2009, 09:44:13 pm
That is a heck of a deal on the trans alone! I'm going to be selling my other mTDI build here...and I know I can't sell my CTN for that low! Wowsers! Suprised someone hasn't picked this up yet!

GLWS.

Joe
Title: *SOLD* FS: 1.9 m-TDI 0-miles *SOLD*
Post by: jtanguay on February 22, 2009, 11:06:44 pm
getting the CTN trans shipped to where i live would probably cost $200+... still a very tantalizing deal though :)

how many km's on it?
Title: *SOLD* FS: 1.9 m-TDI 0-miles *SOLD*
Post by: dieselherb1 on February 23, 2009, 08:16:20 am
Check with R&L trucking. If they are in your area. I've used them before to ship a 02A from St. Louis to Va. $100
Title: *SOLD* FS: 1.9 m-TDI 0-miles *SOLD*
Post by: ezekiel on February 28, 2009, 06:42:12 pm
bump!

Also, transmission tentatively sold.  I just gotta make a box (tomorrow)   :x

--Justin
Title: *SOLD* FS: 1.9 m-TDI 0-miles *SOLD*
Post by: Rabbit on Roids on March 03, 2009, 01:02:28 pm
hey, if you dont sell this thing by september.. ill buy it. cash money. and im close, i live about 80 miles west of portland. but the only catch is, im gonna be in alaska for a while working.
Title: *SOLD* FS: 1.9 m-TDI 0-miles *SOLD*
Post by: subsonic on March 03, 2009, 03:16:56 pm
Was the guy who did the head Franko6?  Thats guy does nice work.
Title: *SOLD* FS: 1.9 m-TDI 0-miles *SOLD*
Post by: bugnut on March 04, 2009, 12:04:00 am
How hard would it be to install this engine into a MK1 body.  My '80 rabbit is in need of a new engine.  Are the engine mounts way off or are there adapters out there?  And I guess the trans mounts too, what is offered out there.
Title: *SOLD* FS: 1.9 m-TDI 0-miles *SOLD*
Post by: ezekiel on March 04, 2009, 11:13:37 pm
@ subsonic: yeah, that guy, it's a beautiful piece of work, excellent workmanship.

@ bugnut: If you have to ask about whether it will install into a mk1, then the mechanical TDI will probably be over your head.  It's not a simple plug and play engine, takes a LOT of tinkering and understanding of how the diesel works, specifically TDIs and how Bosch injection pumps work, but yes, it will bolt into a mk1, it's a VW diesel, things only changed when the mk4 came out.

--Justin

ALSO:  TRANSMISSION IS SOLD!!

THANKS jtanguay!!
Title: *SOLD* FS: 1.9 m-TDI 0-miles *SOLD*
Post by: ezekiel on March 07, 2009, 09:28:20 pm
SOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLDSOLD

Thanks Reuben!  It was nice meeting you and your puppy.

--Justin
Title: *SOLD* FS: 1.9 m-TDI 0-miles *SOLD*
Post by: jtanguay on March 11, 2009, 12:29:20 pm
transmission arrived today! damn thats some fast shipping!!! fedex rocks too! no pesky customs.  :D

haven't torn into the crate yet, but it looks very sturdy  :wink: soon i will have to start the flange swapping process as well as figuring out how i'm going to tackle the hydraulic clutch.

thanks again!!!