VWDiesel.net The IDI, TDI, and mTDI source.
General Information => User's ride Wall => Topic started by: gersgolfs on October 12, 2019, 03:45:19 pm
-
Howdy folks, I’m new to the site and I hope you like my golfs I bought this last yearish It was originally a DX engined GTI golf , however I sold the engine and box and fitted an aaz engine . I had originally bought the Ahu engine to put in the car but I came across a 1995 golf for sale so I bought that and fitted the aaz instead . My car just off the trailer(https://uploads.tapatalk-cdn.com/20191012/6bc82753db59e045d689c0c56dad322d.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/1225d5320920f8cdbdf9b0c2db716f52.jpg)(https://uploads.tapatalk-cdn.com/20191012/da3f6712021151fefac1a0dbc83d6e69.jpg)
Sent from my iPhone using Tapatalk
-
Its Helios blue with a hydraulic roof fitted and big bumper kit originally a 1457 jb engine automatic which was originally bronze then painted black now blue(https://uploads.tapatalk-cdn.com/20191012/a951202cdd887c7ce33adafa21be4097.jpg) first job was to take the interior out for a better look at the chassis which didn’t need any work, so a good base to begin with
-
There is info about getting more out of the 1.9 AAZ power wise on here if you haven't looked around much.
-
(https://uploads.tapatalk-cdn.com/20191012/b1dd3a9c529237005ea5755a4ab14219.jpg)the two wings had rusted a bit under the wheel arches . Luckily I had a repair panel so I cut pieces from it and welded them in . The repair panels look rusty in the pic but it’s only surface rust they’ve been in the shed for years . So I cut out the bad bits and I didn’t need to butt weld new bits in as the welds would be covered by the body kit arches anyway
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/d2af18b58f8298b9f2f86ee65a7faee3.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/c0f93514c98dc5c8aff7bb215018aa07.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/950e17e4cf5dedb515138081c0c8f867.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/b5bcddec2ff2e893894014ecfde1dc76.jpg)I filled it with bondo after I welded it up. I didn’t go too crazy grinding the welds back as it won’t be seen. Then I painted it with 2k primer
Sent from my iPhone using Tapatalk
-
Thanks Dennis I need a bit of help with the wiring that’s why I started this thread ,hopefully You kind people will help me get it on the road (https://uploads.tapatalk-cdn.com/20191012/63633e98c7fa6c007a9f6d858856792e.jpg) The other wing got the same treatment
Sent from my iPhone using Tapatalk(https://uploads.tapatalk-cdn.com/20191012/9724b3e4ee9ab69f5ced6da13d9dc6e7.jpg)
-
(https://uploads.tapatalk-cdn.com/20191012/1a1663944a6c093f0ca6b0546d00c87f.jpg) sorry wrong pic
Sent from my iPhone using Tapatalk(https://uploads.tapatalk-cdn.com/20191012/01ffa1704898df88e189e622a31bb0dd.jpg)
-
(https://uploads.tapatalk-cdn.com/20191012/3fc8a5f06d0d450f5b6a8695db0d02cc.jpg) my bootlid was no good so I managed to get a good spare
Sent from my iPhone using Tapatalk
-
There’s a small repaire to do around the windscreen but I have a repair piece to replace it with. It also needs a repair near the fuel cap
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/bc4cf06859275107f7bec9ad40e940c2.jpg)The driver seat was torn but the main man Kenneth sorted me with a full interior so I just used the passenger seat as the driver seat (https://uploads.tapatalk-cdn.com/20191012/51cc1c8f25714b0015850587341e5b2c.jpg)
Sent from my iPhone using Tapatalk
-
I cleaned the seat up with wet and dry vac and it was like new(https://uploads.tapatalk-cdn.com/20191012/961e4233f705fcecd5fd020a9ca2fc71.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/baff34b3af911cdb48a8b8590262aeba.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/3ccb8410ab9be39972fdc5b050e93a80.jpg) carpet got cleaned too
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/6422bf6bfb6cf89884bb91d8ede9f088.jpg) rear seats looked like they where never sat in
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/58beebbc6c2789189aea9db0f542069e.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/2e2ef315aac36a0355e57c0075b4e237.jpg) seats and carpet back in
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/92f9a41aeeedf1086d35203400074671.jpg) Door cards I got from Kenneth where mint too
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/92f9a41aeeedf1086d35203400074671.jpg) Door cards I got from Kenneth where mint too
Sent from my iPhone using Tapatalk
You guys should check out mkonegolfownersclub it’s uk based and there’s a great bunch of people on there with loads of time for chitchat. Anyhoo
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/e8287b96b45dbdb194f9b37bc475e8fe.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/d18f42389aefdd9a65f0f5961f06a1a1.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/a34458ae0663c544d6497bfaf56a47d2.jpg)I also bought a tonneau cover in blue to match the mohair roof, which had been replaced a couple of years back . So a hydro roof in good condition is one of the reasons I bought the car to begin with to be honest
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/0564d8f382a54484d09b42d57906b7db.jpg)the hydro roof bits
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/31f458e11ed29017b37da0ae598a8be8.jpg) the last interior pic for now
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/4ca0268940e02ca2fb2662026ba43098.jpg) I then tackled the suspension, I’m not going to be driving this all year round so I wanted to make sure the suspension components weren’t going to deteriorate over time from lack of use . I bought this kit as I have it fitted to Mario and it’s fine in that plus I think it would be ok in the heavier cabby
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/f7afa4b895a2e4b5f403efc7d082e156.jpg)
Sent from my iPhone using Tapatalk
-
Let me explain so as not to confuse you people with my two threads and double pics in them.
I wanted to fit 14” pirelli ps to Mario which had g60 brakes so minimum for g60 is 15”. Which are bolted to the hubs with adaptors , the adaptors wouldn’t budge so I just swapped the whole hubs from Mario onto the cabby . So I did a switcharoo (https://uploads.tapatalk-cdn.com/20191012/9e182a83f4a1eea33317e9e9a7bffb9a.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/01d30d38f9518905a6b0839f8a472986.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/00833814718f584090aee0352561870f.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/f5987c70565415719821e13d6e56a739.jpg) While my missus was away I cleaned and painted the front suspension and left it in the porch to cure it was a boiling hot day so it dried quickly
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/46f1b94a6dcb5507a38399e77c57a8b2.jpg) I also fitted new suspension to the rear as the two rear springs where 4 rear springs now both broken
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/397433a058e12cd2728f2ff552f5f69b.jpg)all done bar axle bushings which I’ll do later
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/694517d87adb5756dfefe2874dbba540.jpg) I also fitted handbrake cables
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/1209a579ee3eee711655c643d433fef5.jpg) I bought this lot for rear brake conversion, powder coated orangeI just rubbed it back then paint it black
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/3bff41976ccee508405fad39cbfdf878.jpg)
Sent from my iPhone using Tapatalk
-
I didn’t fit these in the end . The g60 brakes up front along with the 9” servo and braided hoses should be good enough I hope? Anybody on here got that setup?(https://uploads.tapatalk-cdn.com/20191012/8683d1335a8355cd8478212137482d76.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/706966ce18ec71e0e5e571aacb56a509.jpg)the old master cylinder along with the brake pressure thingys
Sent from my iPhone using Tapatalk(https://uploads.tapatalk-cdn.com/20191012/27b7ff21e61a363bcc5b7459d57676eb.jpg)
-
The DX engine coming out
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/6f954ff3ec1f2e3eeea4f365a034ef4a.jpg)Ten minutes later it was in the back of the new owners car. To a tintop gti
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/af9ec2a3ac76fb1b51354f4717d36a63.jpg) The AAZ engine coming out of the 1995 golf poor thing
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/2d84d4c729f4dbe73defcf9c40055c12.jpg)
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/2d84d4c729f4dbe73defcf9c40055c12.jpg)
Sent from my iPhone using Tapatalk
(https://uploads.tapatalk-cdn.com/20191012/a173d8464f4f37f176bef95f78d98e7a.jpg) pic of the fuel pump no idea why.
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/e9b2ea28c21fbeb303281b0c9e559876.jpg)AAZ in the cabby, driveshafts swapped to 100 mm cvs
Sent from my iPhone using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20191012/15d68eb7d0466499ce7190511379ac8f.jpg)
Sent from my iPhone using Tapatalk
-
That’s it for now with the pics . So to update I had to swap brakes over to vectra brakes for 14” wheels to fit and it just escalated. I couldn’t open the bolts that hold the g60 brake adapters so I just swapped over the complete hubs after I refurbished the suspension
Sent from my iPhone using Tapatalk
-
Any progress sir?
Just curious!!
-
No Dennis I’m afraid not I haven’t been near the car in months . It’s not parked at my house unfortunately. I’m hoping to start building my other garage in the next few months and hopefully find time to get the car on the road
Sent from my iPhone using Tapatalk
-
Like I said, I was just curious.
Building a garage takes time, but you will love it afterwards. I know I was extremely happy when mine was finished.
Our garage is filled with diesel VWs...
-
My KINGDOM for a garage!!!
Oh, I don't have a Kingdom. Guess I will never get that garage.
The one that was originally built as part of my house was converted before I bought the place. It was small and wouldn't be worth trying to put it back the way it was. Single, small in the original build.
-
I had wanted a garage for years....
I should have bought stock in car covers when I didn't have a garage.
My 79 that my wife and I basically rebuilt from the ground up and restored had to sit outside for a few years after completed. I cringed at every storm and winter....
So yeah, a garage is nice!! Except when a tree falls on it....
-
Thanks Dennis, I’m hoping to get concrete base done this month then over Xmas I’ll build the walls and roof. My current garage has all my tools in it and no room for my cars. It’s more of a spray booth I’ll be building . I have to spray my cabby before summer2020
Sent from my iPhone using Tapatalk
-
Sounds good sir!!
-
(https://uploads.tapatalk-cdn.com/20191107/38a5e4184dbaf3a1d7c49fff82c8d373.jpg) I bought all these parts recently can anybody tell me if they are of any use? I’ll list the part numbers and maybe you kind folks might shed some light on them.
068 130 081N
068 129 637A
068 145 207
068 129 633
068 130 201 R
Sent from my iPhone using Tapatalk
-
Non-turbo 1.6 injection pump, non-turbo 1.6 metal lines, 3 1.6 vacuum pumps, typical rabbit/gof/jetta turbo exhaust manifold, 6 injectors (no way to tell what they are from without pop-testing - even the bar rating on the sides will not let you know for sure), 1.6TD blow-off valve, 1.6TD downpipe, 1.6TD intake manifold. The exhaust manifold and the downpipe (and maybe injectors) are the only useful parts for an AAZ. Other parts are potentially useful on a 1.6/1.6TD.
-
Thanks Libby a very informative reply much appreciated. The parts didn’t cost me a whole lot I thought I could use them in the aaz for a bit more power.The guy said the pump was from a gtd (https://uploads.tapatalk-cdn.com/20191107/2007120ca871865786a89abc0d7935e0.jpg)
Sent from my iPhone using Tapatalk
-
The pump was not from a GTD (intercooled 1.6TD sold in other markets). It clearly has no boost enrichment. It might have been from a 1.6ECOdiesel which is worse than a 1.6 non-turbo pump.
-
Doh
Sent from my iPhone using Tapatalk