View full version: IDI Engine
  1. seeking rebuild advice regarding minor worthy mods
  2. IDI engines: fuel economy comparison
  3. Meth injection
  4. Gearing
  5. Air Filter opinions
  6. Mysterious reservoir.
  7. Converting 1992 1.6 TD with A/C to serpentine belt drive?
  8. 11mm Head Studs
  9. couple of questions
  10. Rev hang after WOT pulls or any mid to high RPM's
  11. Did all GTD's come with a 210mm clutch?
  12. Are Bosios worth it for a 1.6NA
  13. Garrett GT-15 for 1.6TD?
  14. Is this the Blow Off Valve?
  15. Pushing water out of reservoir, and vibration in cab
  16. About the VNT
  17. Newer MK3 tach issues
  18. hi rev sputter
  19. Where to buy Headbolts in canada for a aaz
  20. Tuning my GTD please help me with all the questions
  21. Compound questions???
  22. oil light/buzzer comes on intermittently
  23. MK1 1.6 TD INTAKE SNORKEL ( BOOT ) Silicone New Production
  24. Compound with VNT? (Now about which turbo's for compound setup)
  25. Industrial Injection experiences, stories
  26. Running Cooler 1.9 AAZ ( Coolant Temp ) hose upgrade
  27. boost feels 'late'?
  28. Adjusting transfer pressure
  29. turbo diesel clutch
  30. AAZ IP / Pulley differences and IP install q's
  31. AC DELETE
  32. 1.6l NA mod help
  33. front brake clip - how is it installed?
  34. having an issue priming the IP
  35. 10 Pounds of boost and 1100 degree EGTs
  36. AAZ pump modification
  37. dimension vw stock trapezoid flange ?
  38. 1.6 turbo, 1.9 turbo or normal in my 82 Pickup?
  39. ARP mainstuds 1.6td 204-5402
  40. AAZ Oil Breather venting question
  41. Do I need arp mains and rod studs?
  42. Tell Me About 1.5 Engines....
  43. Boost by gage value
  44. Intermediate Shaft Mod?
  45. Crankshaft Differences ?
  46. crank storage/acid dipping
  47. rebuilding a 1985 diesel
  48. Pump hitting a wall and blowing smoke...
  49. Sand in block
  50. A bit of confusion on my options with warped heads please read and leave suggest