View full version: Troubleshooting
  1. trying to put ammeter on vanagon
  2. Pulsing clear fuel line
  3. ARGH...overheating...
  4. Aaz serp belt path???
  5. IP Leaking after rebuild
  6. alternator pulley & fan removal
  7. Timing 1.6TD
  8. Thread locker on Oil Pan Bolts?
  9. Oil Dip Stick Tube Removal
  10. 1991 1.6TD, severe starting issues
  11. Does air in fuel lines affect economy?
  12. 94 AQAZ 1.9 Jetta....long idle times ok?
  13. poor headlights
  14. Is it possible for lda starwheel/pin adjustment to cause these major problems?
  15. Does not start, HELP
  16. giles rebuilt my vanagon IP
  17. Need Help Putting Passenger Side CV Assembly Back In!! Please
  18. Back to the experts (electrical)
  19. My Ball joint is too loose on new spindle What size ball joint do I need? Help!!
  20. Intermittent ticking then clacking of an injector (solved)
  21. Low Coolant Sensor
  22. Garret T3 oil return leak
  23. Flywheel threadlocker?
  24. Shifter Relay Lever
  25. 020 trans fluid level check.
  26. Speedo Screw Removal
  27. I am thinking of a word that starts with the letter F
  28. grrrrr now my brakes are failing.........
  29. No hot start (IDI)
  30. Challenge: Solve the mystery of my front end knock.
  31. Brake pressure Regulator repair/replace
  32. rotary vacuum pump clicking unevenly, have brakes and oil pressure.
  33. standard exhaust size?
  34. reverse gear keeps poping out.
  35. Speedo Issue
  36. It suddenly stopped sucking fuel, fixed.
  37. trans drain plug thread pitch?
  38. runs rough under 1/4 tank
  39. My starter groans sometimes
  40. Rotory vac pump not working, oil pumps fault
  41. Clutch release plate
  42. Wastegate initial setup?
  43. Hub cap clips, how to install
  44. No fuel in cold - filter probs (IDI)
  45. any easy way to rotate untimed engine w/out hitting valves?
  46. Temp light flashing
  47. Internal IP pressure again.
  48. Trouble trying to start - can you help a newby please - video of problem
  49. unknown IP settings??
  50. cold starting trick