VWDiesel.net The IDI, TDI, and mTDI source.
Engine Specific Info and Questions => IDI Engine => Topic started by: Huc on December 14, 2018, 11:05:31 pm
-
https://imgur.com/a/vEGYITB
The spray pattern differs a bit between my injectors. They both pop around 2000psi. The Bentley says "check that the injector sprays in an even, compact cone pattern...". How compact/narrow should it be? I'm worried that an incorrect spray pattern can damage the precups, but the Bentley isn't very specific on what the spray pattern should look like.
-
Those are both fine provided they both pop cleanly at a similar pressure and don't pee streams below the pop pressure.
-
"and don't pee streams below the pop pressure."
I bought some new bosch injector inserts,..
and they pissed worse just before breaking pressure than some of the old injectors I have.
They were made in brazil ,.. I'll buy india made nozzles next time.
-
Those are both fine provided they both pop cleanly at a similar pressure and don't pee streams below the pop pressure.
Thank you very much for your help
-
I bought some new bosch injector inserts,..
and they pissed worse just before breaking pressure than some of the old injectors I have.
They were made in brazil ,.. I'll buy india made nozzles next time.
Sigh....... ::)
It is just miserable having to wade through so much dross these days, parts wise.
Badge engineering didn't die with British Leyland unfortunately.