VWDiesel.net The IDI, TDI, and mTDI source.
General Information => Upgrades (non engine related ) => Topic started by: GEE-BEE on December 02, 2010, 09:15:40 am
-
After many hours of making the perfect pattern:
Bed bottom is 3/4 thick and will be attached with tiedown ring's
The tiedown rings from the sprinter van work best
You wont have to use glue or have a velco backing with this method
Tailgate will be 1/4 so it will close properly
The tailgate will be secured with 3M velcro, the rug will have female velcro sticthed to it and the tailgate will have adhesive male velcro stips that will be applied for the tailgate
This product is water/fuel/oil proof
It can be used with or without sprayed ben liners, no more stuff rolling around in the back or getting scuffed up from the bedliner.
Great for hauling bikes or jet'ski's and furniture
I will have them available soon in the future
GB
-
heres some eye candy for us all...
(http://i702.photobucket.com/albums/ww28/Dubsmoke/bed002.jpg)
and dont you guys love how there is now somewhere to tie things to in the bed?
(http://i702.photobucket.com/albums/ww28/Dubsmoke/bed003.jpg)
(http://i702.photobucket.com/albums/ww28/Dubsmoke/bed001.jpg)
pics dont show the tail gate rug tho..
-
it's not done yet, the tie down rings are from the MB sprinter van
I perfer this method if you want to get dirty in the back and remove the Rug
The rug will be available in 1/2 and 3/4 thickness
Fuel/Oil proof
Great for a drive in movie or some Boogie Woogie at the beach !
GB
-
i really like that you added D rings to it...
-
This is cool..
Are you going to be making a piece for the gate also?
-
Tailgate will be 1/4 so it will close properly
The tailgate will be secured with 3M velcro, the rug will have female velcro sticthed to it and the tailgate will have adhesive male velcro stips that will be applied for the tailgate
GB
-
That's kinda funny.
I started reading then saw the pics and never finished the rest.. :)
PM me a price?
-
you should offer an extra thick boogie woogie version
-
LMFAO!
3/4" is pretty thick carpet.. im sure you could get lucky just fine...
-
I received mine this last week.
Just opened the box last night and it looks great.
Just need to decide if I want to do the D Rings or not.
Will post pics when it goes in, currently the bed is filled with snow..
-
You got one of the only three that will probly be ever made....
GB
-
Sorry to bring back from the dead....
GeeBee, do you have any install pics of the tie downs? I know you said they are Sprinter Van tie downs, do they use a bolt and large washers for support in the bed?
-
Yes, all S/S hardware
http://www.ebay.com/itm/VW-VANAGON-doka-caddy-rabbit-truck-d-ring-bed-carrat-x4-/300505283415?pt=Motors_Car_Truck_Parts_Accessories&hash=item45f782bb57&vxp=mtr#ht_2662wt_798
Iam not really back, driving a lowered stepside tundra with a superchrged 5.7, with 6spd and LSD
just finished a stoptech big brake install on all four corners
-
If anyone would like one of these I never installed mine.
Gee-bee, did I keep the D-rings do you remember?
If I kept them did I pay you for them?
spelling errors should be ignored from this device. =-O