VWDiesel.net The IDI, TDI, and mTDI source.
Model Specific Questions and Info => MK2 Golf/Jetta and Audi 5k => Topic started by: mstephenson on December 28, 2018, 06:31:09 pm
-
How/Where do I loosen/tighten the big belt that runs from the crank/h2o pump/ac compressor?
Is it the tensioner just below the alternator? Does that work both the alt and ac?
Please say it's easy.
Thanks,
michele
-
It's on this car
http://vwdiesel.net/forum/index.php/topic,36988.0.html
1.9 TD 1Y
-
I found all the places after I took off the alternator. And yes, it was easy. I guess I was just flummoxed and needed to be more methodical and patient.
On the ac/alt/tension pulley belt is there some way to "lock" it into position beyond the tensioner bolt facing the front of the car? It seems to be loosening a bit with the vibration of the motor.
Thanks, -m
-
If it's like a 1.6, the sliding post for the idler has a 17mm nut to tighten to lock position that the tensioner adjusts.