View full version: IDI Engine
  1. HOW TO I FIX MY TURBO FROM SNAPPING THE SHAFT
  2. whats the normal temp. for an AAZ with a K24
  3. Removing AAZ Head
  4. Head number identification
  5. could you bend a K24 against the intake mani???
  6. Metal Head Gasket on 1.6 solid lifter head?
  7. cold air intake for aaz?
  8. How long is too long for tranny to sit on a shelf?
  9. Building an AAZ
  10. VNT's roughly equivalent to what?
  11. Piston damage diagnosis - pictures
  12. Ok to simply swap crank main bolts without removing caps?
  13. resealing a ve pump .... what parts do i need ....
  14. Pop testing injectors, who? Where?
  15. 1.6 NA hangs after letting off throttle
  16. afterrun coolant fan sensor on AAZ
  17. last call for " venders " .....
  18. more tach q's
  19. Anyone have a PDF or could post B3 AAZ wiring diagram...
  20. Intalled my K24 and.......
  21. Diesel fuel conditioners.
  22. ultra sonic water vapor intake?
  23. jetta and rabbit donor
  24. Curious IP timing question
  25. How do I port my head?
  26. good TD sites??
  27. Flat spot
  28. Advanced timings = bad??
  29. The Famous 1.6TD Boost pin
  30. Truckdoza - The Movie
  31. quick timing question, at my witts end...
  32. SELINOID PUMP MOD PROBLEM!
  33. Could someone tell me what turbo this is please.
  34. 1.6 TD cam questions
  35. Redonkulous (yet preliminary) MPG figures for a 1981 Caddy
  36. T3 on AAZ, 2.5" or 3" exhaust?
  37. K24 2.5" downpipe wanted
  38. idle adjustment screw?? WHERE??
  39. IP outlines - check valves?
  40. Rough with A/C on
  41. Fuel pump scew
  42. Do 1.5 and 1.6 NA manifolds and bolts interchange?
  43. 1.9 AAZ upgrade for 92 Jetta TD
  44. Using a gasser intake?
  45. dynamic timing ..??
  46. That Does It, I'm Building a GTD
  47. AAZ 1.9TD Rover pin part number
  48. MF 1.6 TD Injection Pump on AAZ 1.9 TD
  49. 1.6 into a type 3 squareback
  50. Tbelt not tracking right