View full version: IDI Engine
  1. How much smoke is ok without an EGT
  2. turbo downpipe
  3. EGT mounting
  4. Compression Test and Headgasket Questions
  5. Banging noise?!
  6. poor idle at start excessive white/grey smoke 85 TurboDiesel
  7. pros and cons on frankenmotors
  8. No Boost
  9. k14 turbo upgrade ?
  10. Coolant sensors diagram??
  11. Possibilty for a 1.5 or 1.6L
  12. 1.9L AAZ fuel milage
  13. 1.6TD performance loss questions
  14. Boost gauge hookup?
  15. Has anyone thought of using....
  16. K24 wastegate problem??
  17. Do I need a BOV?
  18. do oil pumps fail suddenly?
  19. Adjustment from the govenorshaft for properfunction???
  20. where to mount oil pressure sender?
  21. Turboing a 1500 NA
  22. Final drive and gear ratio for 82 diesel westy?
  23. AAZ Turbo Feed Oil line
  24. 1990 IDI OK in Seattle?
  25. Intermediate shaft carnage
  26. Basic MF rebuild cost
  27. Normal running temp for a 1.6 TD?
  28. adding more gauges question
  29. AAZ Power house? Mighty Mouse?
  30. 1.6TD camshaft and pump questions
  31. 1.6 TD fuel filter
  32. 2 oil pressure senders on aaz... which one is really needed?
  33. what to use- oil feed and return
  34. power run today
  35. 1.6 NA Exhaust
  36. 80's Audi 5000 Turbo Diesel stock static timing?
  37. how difficult is the pump mod
  38. i need a part number for a ip bolt
  39. AAZ longblock into rabbit 1.6 TD pickup
  40. Well I screw somthing up
  41. Rebuilt pump from Pete Rothenbacher/www.injection-pump.com
  42. 1.6 TD COMPRESSION RESULTS
  43. 1.6 td pulsating under load
  44. what would you do
  45. rebuild stamp
  46. svo emissions
  47. fuel filter band heater?
  48. how to adjust T2
  49. Turbine Blade Failure
  50. quick question