View full version: IDI Engine
  1. yellow dot pump on a 1.6
  2. Can an injector get to tappin?
  3. For those with a Westach EGT gauge
  4. engine overheat prevention alarm
  5. im shaft pulley how u guys remove that with minimal tools?
  6. 1.6 td GT15 Question
  7. Guide/suggestions for affordable mk1 n/a exhaust/dp/etc?
  8. Crankshaft pulley ideas
  9. 1.6d to 1.6 ecodiesel
  10. T3 on AAZ manifold question
  11. Checking main cap installation
  12. Exhaust Options
  13. 1.6td shift points
  14. Turbo Oil Feed Line Question
  15. AAZ valve cover upgrade ???
  16. Where to get a vacuum pump?
  17. need verification about replacing cam
  18. k03 rotor assembly
  19. 1.9L TD AAZ into a 2.slow shell (SWAP) - MK3
  20. My AAZ swap, some turbo connection questions, and a few others....
  21. Automatic 1.6 TD
  22. removing exhaust manifold in car
  23. Can pressure plates be reused??
  24. Changing clutch - out-put shaft came out of tranny
  25. Clocking a VNT?
  26. Resonator recomendations
  27. can you blow a headgasket over night?
  28. What's the name of that piece of plastic in the valve cover and what does it do?
  29. water intrusion
  30. 2nd Ring Specs
  31. Recommendations on rebuild manuals for Bosch VE and 02A/C tranny
  32. CV shafts, gasket?
  33. k03 turbo from an AHU to AAZ
  34. question for the canadian gurus
  35. Tap an 11mm block out to 12mm, can it be done?
  36. connecting rod bolts
  37. Engine rebuild longevity
  38. Here it is.
  39. 1Y/aaz air flow or other issue?
  40. ARP head bolts
  41. quick questoin on aaz pump
  42. Opinions on this lube here
  43. ive got a small fountain for a dipstick (video)
  44. Egt gauge works only when cold ?
  45. Know anyone with one of these in CT?
  46. VNT A** Kicking
  47. total seal rings
  48. Hooked an oscilloscope up to an AAZ pump
  49. How much is a gasser Caddy worth?
  50. Siezed wastegate on a K03, has anyone freed one up?