View full version: Troubleshooting
  1. Another way of 'flushing' our engines out?
  2. Injector problems
  3. frustrated with oil in coolant issue-1985 1.6TD mechanical
  4. AAZ coolant pumps.
  5. are all a3 inboard cv joints larger than a2?
  6. oil lines?
  7. Temp gauge reads high with cold engine and hard cold start
  8. Clutch question
  9. start and die question....sory, long post
  10. odd lack of boost?
  11. Air in return line
  12. alt. wiring? swapping aaz from a3 into an a2
  13. Just put in new rings in my1.6 N/A Do I need to break it in?
  14. Which rings do I need
  15. Signs of a worn out pump????
  16. Need some opinions on a head
  17. IP Timing
  18. loosing boost pressure help!
  19. Temp guage up, no heat
  20. Diesel leaking from LDA vent...
  21. Paper Air Filter - Does it matter which way it goes?
  22. Don't overtighten belt or this happens!
  23. shifter rod shape
  24. Cylinder Walls had some grooves Mech honed out Is that ok??
  25. Turbo issues!
  26. AAZ teardown... good news and bad news
  27. How do I know if it's too advanced? Runs ok.
  28. 1992 eco td starting problems
  29. Seperating exhaust mani and header without special tool? 84
  30. Low oil pressure ?!?!?!?!
  31. Cooling Fan runs as soon as ignition is turned on.
  32. I need ideas to get my '85 Jetta 1.6d to start
  33. Buzzy engine. Injector??
  34. Is it my alternator?
  35. Fan speed resistors...
  36. DIESEL JETTA STARTING LIKE POOP
  37. Idea for checking for leaking injectors
  38. What RPM does the IP Governor begin?
  39. deep socket for 1.6 injectors doesn't fit 1.9 injectors...
  40. Clutch pedal resistance question
  41. Sticky/Loose throttle cable - 1.6
  42. Alignment - 2 wheel or 4 wheel?
  43. Bubbling around injector
  44. Need some help.
  45. Wastegate removal???
  46. tdi timing with indicator
  47. tdi ahu code p1562
  48. another AAZ start trouble
  49. Non Starter after TD swap
  50. Brake hard lines