VWDiesel.net The IDI, TDI, and mTDI source.
General Information => Upgrades (non engine related ) => Topic started by: Maarten on September 25, 2005, 12:40:05 pm
-
Mine is slipping since I mounted the KKK K24 turbo (running @ 1bar) :shock:
-
It sounds like it's worn. Is it 200mm? I've put about 210 ft/lbs through a stock 210mm before it started slipping.
-
Thats about 280Nm.. I wish I was anywhere near that figure.. It starts slipping when the turbo kicks in in 3rd gear, it pulls much harder then the Garrett T2 ~1.2bar.
Anyway, it's time for a Sachs I think 8)