View full version: IDI Engine
  1. 1.9 diesel parts book
  2. flywheel bolt pattern
  3. Sharing my 1.6td project
  4. 1.6IDI Not Fully Rotating/Not Starting
  5. Awakened from a long slumber....
  6. Booster full of brake fluid
  7. Aaz injection line differences
  8. Greater than 20psi mods AAZ T3
  9. Help w cam ID
  10. Cylinder head passage
  11. AAZ rebuild (broke down in Maine)
  12. Turbo 1.6NA checklist
  13. Just wondering about this transmission troubles
  14. 1.9 AAZ
  15. HE200WG: Which turbine housing?
  16. Aaz head salvageable?
  17. Turbo pump and VNT question
  18. Crankshaft Pulley fell off
  19. Source for new oversize pistons
  20. Torque specs
  21. K14 Turbo Rebuild
  22. Am I operating on a misunderstanding?
  23. Water pump replacement pitted surface
  24. Looking for pics and/or part number of 1V Ecodiesel drain line.
  25. AAZ K14 turbo on 1.6td
  26. Turbo converted polo 1.4d(n/a) (1W) with video´s
  27. What injectors to use on a 1.9TD AAZ?
  28. Anyone with an AAZ Head Gasket Chart handy?
  29. Injectors installed without heatshields.
  30. Arco AAZ Pistons Does the Coating change the piston to bore spec?
  31. AAZ Vanagon boost peaks holds for a second then drops off after adjusting fuel
  32. Oil pan mating surface corrosion on block
  33. 4 diesel mk1's at the junkyard
  34. Injection pump damaged by forcing cold start cable at TDC?
  35. 1.6TD Glow plug activation
  36. What is a symptom of the piston striking the head?
  37. Head of Toast?
  38. NOS CY condition
  39. How to make a AAZ K03 Hybrid Turbo?
  40. 1.6TD bore scratches
  41. AMC 1.6TD head after 5000miles
  42. AAZ rod wear @tangs
  43. New Bosch VE pump - basic settings
  44. crossposting - MK2 overheat / water pump questions
  45. Disassembling veggie block w/ piston slap- rod length?
  46. NOS 1.6td pumpe!
  47. K03 Bad Wastegate Actuator?
  48. 5 turbo side-by-side
  49. 1.6TD manual boost controller
  50. Oil in exhaust