VWDiesel.net The IDI, TDI, and mTDI source.
General Information => Upgrades (non engine related ) => Topic started by: ein bora on July 16, 2009, 10:15:19 am
-
Anyone remember the old thread on the DIY $50.00 paint job's?
http://forums.vwvortex.com/zerothread?id=4300727
http://board.moparts.org/ubbthreads/showflat.php?Cat=0&Number=3493382&page=0&fpart=30&vc=1
Well here's my rendition. She's a one footer, meaning it still looks good at one foot. Came out perfect!
(http://img.photobucket.com/albums/v518/truszip/98jetta001-1.jpg)
(http://img.photobucket.com/albums/v518/truszip/98jetta003-1.jpg)
-
Nice. What products did you use?
-
Excellent. I'm planning on doing this too.
-
Nice. What products did you use?
Tremclad
-
That paint job only cost you $50 in materials?!? :o
Nice work man!
-
Very nicely done. Don't get caught with dual plates on her though; your lawyer's retainer will be more than an engine rebuild.
-
it looks great ;D
-
Nice that looks really good.
How many hours did it take you?
-
Car looks good. One thing to keep in mind, any tremclad paintjobs I've seen are bad for fading. Only one I ever did myself looked great when I did it, but lost it's shine big time in about 6 months. It was a lot of ytears ago, but I can tell you I sprayed the car with automotive reducer.... Maybe should have used a hardener?? Or just brushed/rolled the car with no reducer?? Let us know what it looks like a year from now.
-
I am going to roll on my $50 paint job, we'll see how well that goes for me... :) lol what can i use for a sealer/clearcoat? Can, you buy jugs of that stuff and then toll it on too? Or whaT?
-
If you read through the links in the original posting, they say to use Tremclad and mineral spirits for reducing it 50%. Roll on light coats. Won't get a lot of coverage on one coat but because it is so thin, it will self level. Once you get enough coats on, wet sand and buff. I wouldn't bother with clearcoat, that's for a different type of paint.
-
if you look at my "new paint = time for poll" thats my car with tremclad sprayed final coat, rolled flat primer coat.
ps. did you spray or roll
http://www.vwdiesel.net/forum/index.php?topic=18352.45 (http://www.vwdiesel.net/forum/index.php?topic=18352.45)
mine cost me about $100 because i have 1 gal of flat and 1 gal of gloss. i never used more than ... 2/3rd of a gallon?