VWDiesel.net The IDI, TDI, and mTDI source.
Engine Specific Info and Questions => IDI Engine => Topic started by: terry g on November 09, 2021, 10:49:13 am
-
Hi Guys,
What is the torque for stretch type conrod bolts. The machine shop that rebored the block said it was 30nm + 180 degrees, is this correct. The last rebuild was twenty years ago and I used the original conrod bolts.
-
This is what my Bentleys says;
(http://www.veloliner.com/vw/vwenginetorque.JPG)
I would recommend the book. Mine is stock number vg92
-
Thanks for the reply Scrounger, Ill go with the Bently 30nm + 90