View full version: IDI Engine
  1. Aluminum Radiators on Ebay
  2. k14 swap on NA tuning questions
  3. Which alternator do I get
  4. VNT-15 Mk1 Rabbit laggy boost
  5. AAZ metal Head Gasket on a 1.6TD SB
  6. FRANKENENGINE topic-NEW HEADS AAZ VS 1.6hydro/daily vs. preformance
  7. 91 jetta td wp slip pulley
  8. Starwheel question
  9. Runaway!
  10. Alternator Output
  11. Running an AAZ as a 1Y
  12. Electronic Engine Management on a 1.6TD
  13. 82 Rabbit Wiring Question.. WTH is this wire?
  14. n/a 1.9 diesel engine block.
  15. Thrust washers [1.6td]
  16. Ontario out of province inspection.
  17. return lines between injectors...
  18. Short video - new Dieselmeken pump on 1.5 turbo.
  19. throttle modulation
  20. 1600cc head question
  21. Coolant disappearing but no leak on NA IDI
  22. trying to revive an old 1.6
  23. Performance camshafts
  24. injectors ... what are the biggest i can find?
  25. Mk1 question on bearings
  26. Starting up aaz after sitting for a while
  27. Intercooler suggestions?
  28. Can I use mk1 alternator in mk2
  29. MK2 door striker pin
  30. 1.9 aaz mk3 build
  31. AAZ Pump throttle linkage HELP!!!! I did a terrible thing...
  32. Volvo D24 Glowplug choice
  33. Glow plugs and Elsbett nozzles
  34. Building AAZ motor; meet Harley
  35. Inaccurate fuel guage
  36. wanting to add performance to a 1.6
  37. New turbo IP now engine running 10-15 deg hotter???
  38. Need help / info. What pieces are needed to run an old metal timing belt cover
  39. Thoughts on this "bolt on" tdi turbo setup?
  40. Brand New Turbo delivered today (HE200WG from Alcaid)
  41. Freeze Plug Block heater reviews
  42. where to find a complete AAZ
  43. Harsh criticism sought
  44. cant find bolts for my AAZ
  45. Injection pump bracket
  46. AAZ pump and running problem
  47. 1.6l td needs turbo, mls hg, possible pistons :S
  48. Bleeding air out and bubbling injector seal?
  49. Franken-TD for an '84 Coupe: Like i need another hole in my build thread
  50. turbo question