View full version: Troubleshooting
  1. Pulsing clear fuel line
  2. ARGH...overheating...
  3. Aaz serp belt path???
  4. IP Leaking after rebuild
  5. alternator pulley & fan removal
  6. Timing 1.6TD
  7. Thread locker on Oil Pan Bolts?
  8. Oil Dip Stick Tube Removal
  9. 1991 1.6TD, severe starting issues
  10. Does air in fuel lines affect economy?
  11. 94 AQAZ 1.9 Jetta....long idle times ok?
  12. poor headlights
  13. Is it possible for lda starwheel/pin adjustment to cause these major problems?
  14. Does not start, HELP
  15. giles rebuilt my vanagon IP
  16. Need Help Putting Passenger Side CV Assembly Back In!! Please
  17. Back to the experts (electrical)
  18. My Ball joint is too loose on new spindle What size ball joint do I need? Help!!
  19. Intermittent ticking then clacking of an injector (solved)
  20. Low Coolant Sensor
  21. Garret T3 oil return leak
  22. Flywheel threadlocker?
  23. Shifter Relay Lever
  24. 020 trans fluid level check.
  25. Speedo Screw Removal
  26. I am thinking of a word that starts with the letter F
  27. grrrrr now my brakes are failing.........
  28. No hot start (IDI)
  29. Challenge: Solve the mystery of my front end knock.
  30. Brake pressure Regulator repair/replace
  31. rotary vacuum pump clicking unevenly, have brakes and oil pressure.
  32. standard exhaust size?
  33. reverse gear keeps poping out.
  34. Speedo Issue
  35. It suddenly stopped sucking fuel, fixed.
  36. trans drain plug thread pitch?
  37. runs rough under 1/4 tank
  38. My starter groans sometimes
  39. Rotory vac pump not working, oil pumps fault
  40. Clutch release plate
  41. Wastegate initial setup?
  42. Hub cap clips, how to install
  43. No fuel in cold - filter probs (IDI)
  44. any easy way to rotate untimed engine w/out hitting valves?
  45. Temp light flashing
  46. Internal IP pressure again.
  47. Trouble trying to start - can you help a newby please - video of problem
  48. unknown IP settings??
  49. cold starting trick
  50. I found this laying in the driveway..