View full version: IDI Engine
  1. why no boost?
  2. arp head stud nut size?
  3. AAZ IP Q
  4. coolant hose part number 1.6td
  5. Weird Noise
  6. A few issues after AAZ swap into Cabrio
  7. Need some torque Specs...
  8. didn't know I was boosting that much on my NA 1.6...
  9. Gas to Diesel swap, almost there..
  10. Planning for WVO conversion
  11. Thread Size??
  12. Heatshields; single use or multi use? Here is the power to choose!
  13. Help With 94 Jetta AAZ Rebuild
  14. Turbo Oil Return Line
  15. Newbee Looking for help if possible..located in london ontario
  16. Help Picking out a 1.6NA
  17. Fuel filter and oil filter question..and a few others..
  18. AAZ head info needed - valve face depth
  19. Loud injectors
  20. Oil From Turbo Intake
  21. injector seals (slight return)
  22. EGT 1300 degrees in AAZ vanagon , fuel turned down!
  23. oil drainline
  24. Performance exhaust
  25. 1.9 AAZ engine 'problem'
  26. Alternator Idler Pulley Bearing Replacement
  27. Uk mk2 golf gtd boosting problem
  28. Alternator interchangeability - AAZ/1Z/AHU - A/C - no A/C
  29. Finished my car...photos
  30. My 81 vw pu 1.6 na to td build
  31. Eco turbo oil lines
  32. The difference between 1.6NA and 1.6TD pumps.
  33. Exhaust Ceramic Coating
  34. Slight overheating - pump timing?
  35. TT 65 Shore rear trans mount too hard?
  36. Electrical information
  37. Interchangeable ?
  38. ultimate-ish 1.6td build?
  39. AAZ pistons in ALH block
  40. It's almost time to start on the ol' Rabbit again...
  41. my 86 pirelli 4 door gas to diesel build
  42. Thezorn's AAZ rebuild.
  43. K03 Strange turbo?
  44. Wiped out I-shaft bearings
  45. new headgasket and Giles pump, wont start (now with video)
  46. 1.5 head bolts
  47. Can I detect miss by feeling injector line?
  48. New to me 1.6TD
  49. If I use this (slightly damaged) cam....
  50. adjusting idle RPM