VWDiesel.net The IDI, TDI, and mTDI source.
»
General Information
» FAQ/Tech Tips/Please Read First
View full version:
FAQ/Tech Tips/Please Read First
«
1
2
3
»
Intermediate Shaft Bearing Part Numbers
installing mechinical head on Hydraulic block for a vanagon
Test Specifications: Distribtor-type Fuel-injection Pumps
Electric lift pump?
Better shift linkage and short throw kits for the mk1/2/3
turbo calculator
Compound Turbocharging for Dummies
Bosche 90 A repair page
More power for your 1.6TD
DIY Dash LED's
One Piece Integral Thrust Bearing VS Factory Style Thrust Bearing
Random (hopefully helpful) hints for the new folks in town
DIY fix for screwed up crank noses
Clutched alternator pulley upgrade on AAZ
How a VE pump works
Special advice for Canadian winters
garrett t3 rebuild questions
Clutch replacement - New hardware ?
Flange Drawings, and others
Why do I want "expensive" head studs for a 1.5 or early 1.6??
the difinitive prechamber size thread
Free Wheel Pulley on Alternator for AAZ Engine
Frozen E-brake cables
how do I post pictures and video?
Special Tools
Tire Sizes
Injection pump torque specs
Economy of 1.5 vs 1.6 - for generator use...
11mm Electric pump wiring. Early 2 piece plug to later single piece connector
GOVENOR MOD - method with lots of pics
How to fix a backup light switch.
The Head Thread For IDI Engines "So you wanna put this head on that engine?"
Lab results for popular fuel additives
How to perform a voltage drop test
Another Injector Pop Tester DIY
Excellent site with lots of FAQs and links to just about everything
VW Biodiesel Forum?
glowplug tip
SKF online catalogue
02A 02C and 02J Information. Gearing/Gear ratios
Cable Clutch setup for 02A / 02J Pic's and part numbers
V.I.N decoder link
Swirl chambers and head gaskets.
Oil fitting thread sizes
The best Valve Spring compressor. (head out of car)
Dual plenum photo
Fuse Block RE-Vamp?
Stock turbo diesel exhaust manifold material (NiCr 202)
VW/Audi speciality tools direct from VW!
VNT & mechanical compounding article from Cummins