View full version: IDI Engine
  1. Intermediate shaft pulley failures, anyone?
  2. 1.6 sb td mk2 golf to 1.9 tdi
  3. Turbo a 1.5l ... 79' Rabbit
  4. New motor for an 82 Westie
  5. '84 GTI turned 1.6 TD
  6. One more arp head stud torque question
  7. Adapting '81 1.6N/A for "industrial" use
  8. 1.6 GTD head
  9. newbie alert
  10. 86td wont respond to throttle until i press it half-way
  11. electrical issue
  12. minimum clearance valve to piston aaz
  13. Holset install
  14. "Stretched" head bolt length
  15. 1982 vanagon
  16. Nissan LD20 specs usable for vw pumps?
  17. Head Stud depth
  18. cracked injector bore
  19. Alternator help
  20. bleeding air out of fuel lines on AAZ
  21. Filter Minder
  22. In progress mini-refresh
  23. 8v T3 Turbo manifold on AAZ
  24. How to resurface a head at home
  25. 1.9aaz swap motor on the way. need help
  26. 1.9TD w/K14 woes
  27. Just bought an 88' idi
  28. 1.6D Cold Start Bad Stumble/Misfire - MK1
  29. Very rough running
  30. M5 bolt torque on pulley to crank pulley
  31. CY vs MF engine
  32. Are turbo bolts 1 time use?
  33. Oil catch can
  34. Toyota swap none electronic
  35. 1.9 tdi block with 1.9idi head
  36. Ecodiesel IP
  37. 1.6td idle drop
  38. AAZ power loss, idles and starts fine
  39. ECO AAZ oddities
  40. How much boost pressure can a 1990 Vw jetta diesel take
  41. what's the best engine for a vanagon?
  42. 1.6td injection pump fuel screw settings
  43. Another AAZ pully wobble question
  44. 1981 Rabbit Diesel - poor power!!
  45. 1.6td JX rebuild advice
  46. IP timing question
  47. AAZ, low power, low boost, doesn't rev, otherwise perfect
  48. Turbo drain fitting
  49. slowly decreasing oil pressure?? please help!
  50. Anyone have timing tools handy?