VWDiesel.net The IDI, TDI, and mTDI source.
Engine Specific Info and Questions => IDI Engine => Topic started by: Bigmick77380 on August 20, 2018, 01:03:23 pm
-
Hi guy's !
Somebody already try to make an adaptator to fit a t25 turbo flange to a 1z exhaust manifold ?
Or do you know a good exhaust manifold who look like the one of the 1z ? (with the turbo under the manifold).
I will put a Hx27w with a 5cm² housing on my AAZ, and i need a exhaust manifold with turbo under it because i want to put an AWIC juste behind the intake manifold (of a PD130), so i will have an super short piping in 2.5".
Thanks :D
-
Search for 8v manifolds on eBay. There's ones that go straight out and ones that go "up" but you could pretty easily flip it and have the mount facing down
-
Check out the individual pictures on this ad on CL. Is that the needed trapezoidal flange you seek?
https://seattle.craigslist.org/kit/pts/d/vw-16-diesel-motors-turbo-and/6669263268.html
-
sounds like he wants a t25 manifold to mount a holset with a bottom outlet like that pic
-
Thanks for the answer
Yes i want something like this :
http://www.eurotrashmotorsports.com/wp-content/uploads/2016/09/IMG_8101-570x427.jpg
The thing is that i want the cheapest manifold, and the less expensive that i found cost 160€ (185$)
So befor i buy it, i want to know if i can found something cheaper :)
-
Also i looking for a pump preparator around france, i want a pump who work great with the hx27, and i don't think mine was the good one for this....