View full version: IDI Engine
  1. starter ground
  2. 1.6 Intake on 1.9 head? What have others done to make it work?
  3. THIS IS THE POINT IN THE PROCESS WHEN I ADMIT I HAVE NO IDEA WHAT I AM DOING
  4. Who has done a k24/k26 and are completely thrilled with the results?
  5. idle adj. screw not working?adjust vnt linkage out of car?
  6. What type of IC to use on 97 MK3
  7. Thermostats compatibility
  8. Can I get some details on this IP
  9. tube header
  10. NOOB Introduction
  11. Injection lines. Sources?
  12. Hi Guys..Turbo Advice needed
  13. might sound stupid but......
  14. 1.9 TD oil light
  15. Older Cabriolet
  16. door mirror help needed
  17. output flanges??? 90mm or 100?
  18. IDI or TDI for a 72 Camper conversion?
  19. Hesitation while taking off
  20. "electric" aaz pump...want to simplify!
  21. Lubricant Gobbledegook
  22. Anyone here promoting or running the 19:1 CR philosophy?
  23. 02a swap question
  24. Two evil bolts on the crankshaft pulley
  25. very irritating
  26. Head Gasket Preload
  27. PD Crank into 1Y??
  28. Darth Garry Apprentice Training...
  29. varnish in ve bosch pump
  30. Full Load Adjustment Screw
  31. WVO & Injector breaking pressure
  32. crack in block?
  33. Is a leaky IP hurting things? or is it ok to run for a while?
  34. Turbo calculations and compressor maps
  35. IP swap question
  36. 2nd ring on a M21D24 piston
  37. No cooling system
  38. Rings?
  39. need new head........
  40. Governor differences on NA vs. TD pumps
  41. TD Exhaust manifold flip on A2: Not possible
  42. Auto trans rebuild/hop up..
  43. Fastest Nozzle change and GP check - for 8v-of-fury ;)
  44. GTD into a corrado?
  45. AAZ Build Up
  46. t2 turbo indexing
  47. Oil in the intake 1.9 td
  48. Idling issues and EGR vacuum pipes.
  49. Cold Start Cable Problem
  50. PD150 INTAKE ON A 1.9 AAZ ??