View full version: IDI Engine
  1. Building a New Rabbit Heart - 1.9 TD
  2. Connecting rods?
  3. Need a little help on my bosch 1.6TD VE injection pump please
  4. Fuel filter location
  5. KSB reduces power when hooked up
  6. 1.6na injection pump max fuel screw o-ring size/pn?
  7. Pump timing too advanced?
  8. AAZ Ring gap?
  9. Where to buy LDA pins for custom grind
  10. Adjusting the IP to match the Holset
  11. 1.6 hyd to mech head swap
  12. 1.6TD - wheres my injection pump leaking from? (video)
  13. Head gasket fix in a bottle?
  14. Tach on 1.6D???
  15. Clutch upgrade AAZ
  16. Garrett T15 or KKK14 (Stock Mk3 TDI IC fitted)
  17. Garrett T15 Wastegate Adjustment on my 1.9L IDI AAZ
  18. 1.9TDi MLS head Gasket on a 1.6TD
  19. Oil cooler, fitting longer Passat threaded tube union
  20. Injection Pump Hanging
  21. Installed metal injection lines: Couple of Issues
  22. Opinions Requested: Difference between K14 & K24 turbo with JX engine
  23. Gas Tachometer Conversion to Diesel W terminal - '87 Vanagon
  24. Injection pump timing
  25. 1,6TD JX Possible HEAD work
  26. Terrible mileage
  27. Banjo bolt questions
  28. Tow start time?
  29. turbo play
  30. Fabbing an intake manifold - design ideas?
  31. 1.6TD, what turbos fit?
  32. LDA Boostpin Results on 1.9TD AAZ
  33. Diesel-Swapping a 1982 Audi 4000
  34. Whats this AN stamped on my head?
  35. intermediate shaft leak - 4th time - help? Repair sleeve questions?
  36. Where to buy quality vw diesel parts in Canada?
  37. Headgasket replace while engine is warm/hot
  38. aaz Front Main Seal
  39. Exhaust smell in cabin
  40. 1.6na Jetta restoration...pump rebuild for biodiesel
  41. Adjustable pump sprocket......how to set the timing?
  42. Starter not engaging every start, 1.6
  43. Printed circuit repair
  44. Intake manifold
  45. Need help trouble shooting ! possibly fueling problem
  46. Help installing intercooler
  47. My new Giles pump is on its way. What else should I fix while pump is off?
  48. 81 rabbit pick up fuel issue?
  49. 81 1.6 timed at 94, what is safe to go to?
  50. 81 Bosch IP rebuild/re-seal the same thing? Leaking at pulley, ugh