View full version: IDI Engine
  1. What valve covers fit the 1.6 N/A ? My stamped one seems to be warped...
  2. EGT Gauges
  3. Injector nozzles
  4. 1.6 NA A/C Compressor Hex Key sizes
  5. seeking drive belts shield for 92 jetta
  6. bleed valve on a kkk?
  7. K03 turbo rebuilt.
  8. No fuel through the IP
  9. Smoking after just sitting
  10. AAZ Help!
  11. Stupid quesetions
  12. GTD wont start when warm?
  13. Strange Glow Plug Problem
  14. wont start occasionally?
  15. Does water normally boil on the outside of the headgasket ?
  16. What exactly does the "cold start" pull out do on my MK1?
  17. IP pump Timing
  18. AAZ on the way and I have ?'s
  19. Help with head removal
  20. new 2 diesel - mk2 aaz build
  21. Power engine build do I use the AAZ or 1.6 GTD block
  22. Another Tach Question with a Twist
  23. another AAZ question
  24. Turboing a N/A
  25. How to isolate possible air leak into a VW diesel fuel system?
  26. oil leak question - around head gasket!
  27. I need some measurements AAZ ALH
  28. Rebuilding a 1.6D for turbo
  29. Screws/Bolts for Rad Fan shroud on replacement radiator
  30. Don't follow these guy's
  31. AAZ carnage
  32. tach idea for mk1
  33. 1.9 NA tuning
  34. Missing Bolt - alternator mount
  35. Is my turbine and compressor wheels too small?
  36. stripped tensioner stud. need recommendations.
  37. info on this turbo?
  38. Just finished K24/K26
  39. AAZ EGR blank off?
  40. intermittent pump problem, or is it something else?
  41. Cooling Problem
  42. Review: prothe k24 turbo oil return line
  43. mounting a fmic
  44. Too much boost=bad
  45. Valve Cover Won't Seal, WTF
  46. What's this cap on the inlet manifold?
  47. blowby
  48. My Pump Started To Leak =(
  49. IP adjustment wackyness
  50. replacing cluster lamps