sold out

[vwmike]

10 psi eh? It is damn near impossible to set an injector within 10 psi using a conventional pop tester and the commonly available shims. Spec is 130 to 138 bar (1849 to 1963 psi) for NA or 155 to 163 bar (2248 to 2364 psi) for TD's. A difference of .05mm in shim thickness will cause a pressure change of approximately 5 bar (71 psi).

[Smog]

10 psi eh? It is damn near impossible to set an injector within 10 psi using a conventional pop tester and the commonly available shims. Spec is 130 to 138 bar (1849 to 1963 psi) for NA or 155 to 163 bar (2248 to 2364 psi) for TD's. A difference of .05mm in shim thickness will cause a pressure change of approximately 5 bar (71 psi).

something about using higher pressure injectors in an older diesel ;

sometimes, a badly worn fuel pump will not be able to built the pressure required to open the newly rebuilt injectors; so If I'm asked to bump up the pop-pressure by another 20 bar, the fuel pump MAY NOT be able to work with them unless it got another pump head (like a 10mm or a 11mm from a TDI)

[DubAllStar]

Interested in a set of AAZ injectors if you've got any left. If you could advise me as to what's required to install them, and how to pay you, we'll be in business very shortly

[Smog]

Interested in a set of AAZ injectors if you've got any left. If you could advise me as to what's required to install them, and how to pay you, we'll be in business very shortly

paypal is fine, what is required to install them is a torque limiting wrench.

COD is available for Canadians

[Jeff@TheQuadShop]

Ok, i need new nozzles for my 1.9 AAZ. Am I better off getting the AAZ nozzles or going with the GTD ones?

[Smog]

Ok, i need new nozzles for my 1.9 AAZ. Am I better off getting the AAZ nozzles or going with the GTD ones?

the GTD may flow a bit better but new nozzles (AAZ or GTD) will give a significant improvement over the stock worn nozzles.

[Jeff@TheQuadShop]

Ok, I'll take the GTD's. How do you take payment and what is the total in US funds? I'll take the fast shipping option.

[Smog]

Ok, I'll take the GTD's. How do you take payment and what is the total in US funds? I'll take the fast shipping option.

85$ + 10$ for a 7 to 10 days shipping

or

give me your postal/ZIP code for a UPS quote

[Jeff@TheQuadShop]

Ok, so $95can. How do you take payment?

[Smog]

Ok, so $95can. How do you take payment?

paypal at [email protected]

thank you

[jesse7]

are the TDI nozzles powerplus, sprint or something else?

and is it $160 for a set?

[Smog]

are the TDI nozzles powerplus, sprint or something else?

and is it $160 for a set?

The TDI nozzles are OEM replacement for the TDI 110hp as the Sprint nozzles are.

and the price is 160$ shipping included for the 0.205mm or the 0.216mm

thank you

[Jeff@TheQuadShop]

Payment sent.

[ancient]

Got more GTD nozzles in stock?  I will need one set,  let me know how much total is including shipping.  Thanks.

I got 10 sets of 1.6GTD nozzles (RA/SB engines )

and

25 sets of 1.9TD nozzles (AAZ engines)


85$can each set


add 10$ for fast shipping anywhere


I also carry the 0.205mm and 0.216mm nozzles for the TDI at 160$can

[Smog]

Got more GTD nozzles in stock?  I will need one set,  let me know how much total is including shipping.  Thanks.

I got 10 sets of 1.6GTD nozzles (RA/SB engines )

and

25 sets of 1.9TD nozzles (AAZ engines)


85$can each set


add 10$ for fast shipping anywhere

I have a lot of them and you quoted the answer to you question  :lol: