This is the most depressing thing I've dealt with all month. (including being in the drivers seat, before/during/after totaling an '09sportwagen)If need be, I have a 79 diesel rabbit, that can be a "mock up" vehicle, or I can find something else to donate...I need 3 manifolds/IC&piping/DP&exhaust kits, for my A1 diesels, and if passenger performance can't make 'em... who can :? :cry:
Here's a good thread on the subject... basically you just need to buy a mandrel-bent J-tube in the diameter of your choice and you'll have all the twists and turns you'll need:http://vwdiesel.net/phpBB/viewtopic.php?t=14003&postdays=0&postorder=asc&start=0&sid=fb9ce665ce766686b12e0330a321e983I've used the vendors mentioned in this thread to procure my own parts and they were all good.
Quote from: "Vincent Waldon"Here's a good thread on the subject... basically you just need to buy a mandrel-bent J-tube in the diameter of your choice and you'll have all the twists and turns you'll need:http://vwdiesel.net/phpBB/viewtopic.php?t=14003&postdays=0&postorder=asc&start=0&sid=fb9ce665ce766686b12e0330a321e983I've used the vendors mentioned in this thread to procure my own parts and they were all good.I know this is not a Q@A subforum but just to be clear, all you need is a mandrel-bent J-tube for all of the bends? Seems this option is much cheaper than buying one.
Columbia River Mandrel Bending over in Saint Helens, OR has kits for just about anything you want to make. They've been mention before on the forum here by 53 willys and they have some really nice kits to put your own system together with.