Author Topic: Diesel Dashboard Printed Circuit (Read 3472 times)

LesAlbin · « **on:** April 11, 2007, 04:16:54 pm »

Caddy with dash from A-1 diesel Jetta has fried dashboard circuit board. Any leads on good used printed circuit or someone knowledgable about repairs would be appreciated.

BlackTieTD · « **Reply #1 on:** April 11, 2007, 05:50:07 pm »

I'd try to find a used gauge cluster that is similar. Use that, or use its printed circuit on your current cluster.

burn_your_money · « **Reply #2 on:** April 11, 2007, 10:27:07 pm »

I have one, it has a clock. LMK if it's of interest. I won't be able to test it though

LesAlbin · « **Reply #3 on:** April 12, 2007, 10:49:04 am »

Thanks for the help. A local speedometer shop thinks they can repair the old board by soldering wires across the bad sections. Guess I will give that a try first. This board is actually the second one I have had in the truck. The first one had so many wires soldered onto it that the guys at the shop ran out of room to make connections.

burn_your_money · « **Reply #4 on:** April 12, 2007, 12:41:46 pm »

:shock: that's craziness. Good luck with it