Diesel Tach - page 2 - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• #15 by type2 idi on 04 Dec, 2004 11:39
• Here's some pictures of my adapter with a 200mm flywheel from a beetle with a water-cooled's bolt pattern heart.
  <img src="http://img.photobucket.com/albums/v508/Type2/100_4182.jpg">
  <img src="http://img.photobucket.com/albums/v508/Type2/100_4181.jpg">
  
  Yann
  A-Bus-With-No-Name 77
• #16 by type2 idi on 04 Dec, 2004 11:40
• Oupps!
  
• #17 by addautomotive on 04 Dec, 2004 15:33
• Hey type2 idi,
  
  I've sent you a Private Message for more info on your adapter plate.
  
  A couple questions:
  
  1) you say you use a "200mm flywheel from a beetle with a water-cooled's bolt pattern heart." Where did you get this? Did you machine it yourself?
  
  2) What starter do you use?
• #18 by type2 idi on 04 Dec, 2004 18:59
• :oops:  Thanks for little lesson S., for the flywheel I get the heart done at a machine shop then they weld to the flywhell and its off to the balancing. For the stater when I use a gas engine I stay with the starter from the Bus but in this case I use the starter from the engine (Jetta 97) I just have to modify the Bus bell housing a little!