Author Topic: Valve Cover Gasket Fix? (Read 2603 times)

AdAm84 · « **on:** November 21, 2006, 06:07:05 pm »

Does anyone know where to get a better valve cover gasket than the cheesey ass cork one? or a better way to seal it?

burn_your_money · « **Reply #1 on:** November 21, 2006, 06:26:08 pm »

You can get a rubber gasket one, you need differant studs too. I *think* its from a g60

anarchyx34 · « **Reply #2 on:** November 21, 2006, 09:46:54 pm »

I bought mine from http://www.germanautoparts.com/Volkswagen/Golf/Engine/102/1

monst · « **Reply #3 on:** November 22, 2006, 10:09:14 am »

Is the chessie cork one leaking or is this just
personal preferance....... I too am into using
non-corkers....... but I used it anyway.....
mine is not leaking...........................
good enough.............

RabbitJockey · « **Reply #4 on:** November 22, 2006, 07:14:55 pm »

you can use a rubber gasket from a corrado g60, some places won't list the rubber gasket, at napa they list the cork on for the corrado, but it shoul dbe the rubber one. i haven't had any trouble with the cork... just when its over tightened it likes leaking

AdAm84 · « **Reply #5 on:** November 23, 2006, 01:10:51 pm »

i don't like the cork ones. and it's leaking bad so i have to replace it. plus i need to adjust valves and don't want to keep getting gaskets.

stewardc · « **Reply #6 on:** November 24, 2006, 07:13:29 am »

eBay Item number: 300051013306 is what I use and they are fantastic.

Author Topic: Valve Cover Gasket Fix? (Read 2603 times)

AdAm84

anarchyx34

AdAm84

stewardc