« previous next »
Pages: [1]

Author Topic: Injecion lines....  (Read 4120 times)

November 06, 2006, 06:22:34 am

g-spec

  • Veteran
  • Offline
  • ***
  • 289
Injecion lines....
« on: November 06, 2006, 06:22:34 am »
I have a 95 TD which had a timming belt failure, so i replaced the head with a rebuilt one from a passat....had the passat injectors rebuilt since they looked like they were in better condiotion.....my problem now is the passat injectors are about 1/2 of an inch shorter than the golf ones were....so the injection lines dont match up.....
how do i know which lines i need and where would i be able to get some???
any comments appreciated
thanks
Michal
Logged
Reply #1November 06, 2006, 09:27:21 am

g-spec

  • Veteran
  • Offline
  • ***
  • 289
Injecion lines....
« Reply #1 on: November 06, 2006, 09:27:21 am »
The numbers on the injectors i have are as follows:
KCA30S44 France 155 Bar 068 130 202 E
Logged
Reply #2November 06, 2006, 07:16:27 pm

g-spec

  • Veteran
  • Offline
  • ***
  • 289
Injecion lines....
« Reply #2 on: November 06, 2006, 07:16:27 pm »
Turns out that the injectors i got rebuilt cannot be used on my motor......
so i am in search of at least one injector....or 4 good ones!!!!
thanks
Logged
Pages: [1]
« previous next »