« previous next »
Pages: [1]

Author Topic: Torque specs  (Read 5017 times)

September 19, 2023, 06:58:38 am

93Ford

  • Junior
  • Offline
  • **
  • 63
Torque specs
« on: September 19, 2023, 06:58:38 am »
I need the torque specs for the intermediate shaft pulley, injection pump mounting bolts, injection pump pulley nut, and the timing belt tensioner nut. Also should i use any loctite on any of the bolts/nuts. 1985 vw jetta 1.6 na diesel
« Last Edit: September 19, 2023, 07:55:51 am by 93Ford »
Logged
Reply #1September 19, 2023, 07:07:14 pm

fatmobile

  • Veteran
  • Offline
  • ***
  • 2922
    • http://www.geocities.com/vwfatmobile/
Re: Torque specs
« Reply #1 on: September 19, 2023, 07:07:14 pm »
33ftlbs for the I-shaft, tensioner and cam bolt.
 I use blue locktite on the I-shaft seal carrier bolts and I-shaft bolt.

I just snug the injection pump mounting bolts/nut.
Logged
Tornado red, '91 Golf 4 door, with M-TDI 12mm pump, south bend clutch, VNT-15 turbo, 02A trany
MK4s: 2000 TDI jetta, 2003 TDI wagon, 2000 golf 2.0 gasser.
'84 Rabbit with 1.7TD KY block pistons bored to 80mm, VNT-15
'84 GTI with stock 1.6TD starion intercooler.
Reply #2September 20, 2023, 06:40:28 am

libbydiesel

  • Global Moderator
  • Veteran
  • Offline
  • ****
  • 3399
Re: Torque specs
« Reply #2 on: September 20, 2023, 06:40:28 am »
The Bentley is worth having. 
Logged
Reply #3September 20, 2023, 08:02:36 pm

ORCoaster

  • Moderator
  • Veteran
  • Offline
  • ***
  • Handy at too many things to list. The envy of those needing Utube
  • 4549
  • Personal Text
    Caddy all painted and now its interior time
Re: Torque specs
« Reply #3 on: September 20, 2023, 08:02:36 pm »
IF you have VW keys you should have a Bentley Manual. 
Logged
Pages: [1]
« previous next »