WTB Straight intake flange for 1.6TD Quantum or Audi 4000

[slow and ratty]

Looking for a straight bolt on intake flange for 1.6 TD Quantum or Audi.  Not the elbow.  Thanks

[ORCoaster]

Do you need the ones that hold the intake manifold to the head?  You should be able to get those from the hardware or auto parts store.  I think they are 6 mm and 35 mm or 40 mm long.  Take the one you have and match them for the pitch of the thread. It may be 1.25 but I could be wrong on that.  I always check after I bought some that were 5mm too long and poked it through the head on the exhaust side.  Not that it mattered much, but it did become an oil leak spot. 

[libbydiesel]

It's funny sometimes how much punctuation can significantly change the meaning in text.  I think there should be a dash between "bolt" and "on" making it "bolt-on".  I don't think they are looking for any bolt, but rather the flange itself, as seen here:

[slow and ratty]

Yes, that is what I'm after.  I may end up having to fabricate something, but I hope not.   I see what you mean about punctuation there.

[slow and ratty]

If someone has one that is attached to an intake and doesn't want to part it out I would purchase the intake manifold.

[ORCoaster]

Bolt on, Bolt-on, Bolton.  Yeah, English is so strange that way.  I don't think I have that straight flange my intakes all have the elbow.  But I will look in the shed in the morning to be sure.  Such a simple thing to find. 

Auto correct software wants it to be bolt-on

[slow and ratty]

Connection piece found.  Now looking for an intermediate shaft pulley that isn't missing a chunk.