Fixmyvw.com

Author Topic: Holset HE221W With Manifold  (Read 3645 times)

July 27, 2019, 12:12:27 pm

Jo3kr

  • User+

  • Offline
  • *

  • 38
Holset HE221W With Manifold
« on: July 27, 2019, 12:12:27 pm »
Trying to get rid of my Holset as I want to go a different route. Turbo worked excellently in my 1.9TDI Caddy, easily hits 20-30psi but I want more power on the lower end so going smaller.

Turbo is genuine and is bolted up to a T3 manifold with a T25 adapter I have since had the adapter and manifold welded for extra security. I ran the turbo for less than a couple hundred miles and I bought it new off eBay. Believe it’s a 6cm exhaust housing I never checked and I have to unbolt it to figure it out. I made the bracket by hand for the wastegate and I’ve had no issues with it. As the turbo had to be clocked to work on our cars.






I can include the blanket, exhaust flange, filter, etc for more we can work something out. I think I even have an extra set of vband clamps if needed.

Truck ran 90mph in the quarter mile with this turbo at 15psi and broken 020 tranny fwiw.

$550 for just the turbo and the manifold.


Sent from my iPhone using Tapatalk
« Last Edit: July 27, 2019, 12:36:24 pm by Jo3kr »



Reply #1August 30, 2019, 05:33:54 pm

forbesthebrit

  • Newbie

  • Offline
  • *

  • 12
Re: Holset HE221W With Manifold
« Reply #1 on: August 30, 2019, 05:33:54 pm »
PM/Emailed about this.

 

S-PAutomotive.com