« previous next »
Pages: [1]

Author Topic: Waste gate issues  (Read 2370 times)

March 05, 2006, 05:01:29 pm

stewardc

  • Guest
Waste gate issues
« on: March 05, 2006, 05:01:29 pm »
I've been looking at a 1983 TD from a Jetta. Apparently it does not have a KKK turbo on it, and the owner stated that the turbo it does have historically had wastegate issues. Apparently there is a "tin can" that is part of the actuating mechanism and these rust out. I was just wondering if there is some sort of aftermarket waste gate and controller that could be put on this engine that would do away with this issue.
Logged
Reply #1March 05, 2006, 06:20:20 pm

Fisher

  • Junior
  • Offline
  • **
  • 148
Waste Gate Issues
« Reply #1 on: March 05, 2006, 06:20:20 pm »
Check it out carefully, the Waste Gate on a Garrett Turbo is a good one and seldom fails.
Logged
Reply #2March 06, 2006, 05:30:31 am

stewardc

  • Guest
Waste gate issues
« Reply #2 on: March 06, 2006, 05:30:31 am »
:D  :D  :D  :roll:
Logged
Reply #3June 04, 2006, 05:26:35 am

RWPerry

  • Newbie
  • Offline
  • *
  • 9
Waste gate issues
« Reply #3 on: June 04, 2006, 05:26:35 am »
Quote
I've been looking at a 1983 TD from a Jetta. Apparently it does not have a KKK turbo on it, and the owner stated that the turbo it does have historically had wastegate issues. Apparently there is a "tin can" that is part of the actuating mechanism and these rust out. I was just wondering if there is some sort of aftermarket waste gate and controller that could be put on this engine that would do away with this issue.


I have a 1983 Jetta engine with the same issue with the tin can around the waste gate. The engine is out right now and I would like to find out if this is something that can be fixed and how.
Any suggestions appreciated.
Thanks,
RWPerry
Logged
Pages: [1]
« previous next »